- 1、本文档共32页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
南 阳 理 工 学 院
本科生毕业设计(论文)
学院(系):电子与电气工程学院
专 业: 自动化
学 生:
指导教师:
完成日期 2012 年 5 月
南阳理工学院本科生毕业设计(论文)
基于AI-808P智能仪表的程序升温控制
Temperature Program Control Based on The Intelligent Instrument of AI-808P
总 计: 27页
表 格: 2个
插 图: 24幅
南 阳 理 工 学 院 本 科 毕 业 设 计(论文)
基于AI-808P智能仪表的程序升温控制
Temperature Program Control Based on The Intelligent Instrument of AI-808P
学 院(系): 电子与电气工程学院
专 业: 自动化
学 生 姓 名:
学 号: 096108051
指 导 教 师(职称): (副教授)
评 阅 教 师:
完 成 日 期:
南阳理工学院
Nanyang Institute of Technology
基于AI-808P智能仪表的程序升温控制
PAGE II
基于AI-808P智能仪表的程序升温控制
自动化专业
[摘 要] 本设计以模拟夹套锅炉为控制对象,以AI-808P智能仪表为控制器,实现对锅炉温度升温-保温-降温的程序曲线控制。升温、降温过程具有线性增加或递减的特点,且升温过程比降温过程惯性大,降温时冷却水注入有滞后,保温时控制精度较好。通过RS485现场总线实现智能仪表和上位机的通讯,实现了对控温过程的计算机监控。监控软件设计以力控组态软件为平台,开发监控画面,来达到对锅炉温度的实时实地监控,监控内容包括实验项目指导,控制参数设置与显示,响应曲线、实验数据记录等。
[关键词] 智能仪表;RS485;温度;双极性控制
Temperature Program Control Based on The Intelligent Instrument of AI-808P
Automation Specialty HE Bing-yang
Abstract: This design develops the process of project and controls the temperature changing of the boiler by treating automated laboratory equipment as the controlled object and AI-808P intelligent instrument as the controller, as well as using the PC monitoring. The field bus RS485 communicates intelligent instrument and the dominant computer. The dominant computer is able to communicate one-on-one with smart instruments through the setting of the instruments address. Using power and configuration control software as a platform, monitoring software design develops the monitor screen to achieve the real-time/site monitoring to the control system. The monitoring contains instruction of the experimental projects, control of parameter setting and display, the response curve, and the experimental data recorded, etc.
Key wor
您可能关注的文档
- 毕业论文·设计《湖南澧县方言语音研究》.doc
- 毕业论文·设计《回流法提取枸杞中抗氧化成分的研究》.doc
- 毕业论文·设计《会计对象问题探讨》.doc
- 毕业论文·设计《婚恋网营销策划方案》.doc
- 毕业论文·设计《混流式水轮机主轴密封》.doc
- 毕业论文·设计《混凝土拖泵整体式环保作业舱设计》.doc
- 毕业论文·设计《火电厂凝结水精处理的系统》.doc
- 毕业论文·设计《基于ADINA的单井抽水引起的地面沉降数值模拟研究(简述)》.doc
- 毕业论文·设计《基于PLC300的挖泥船泥门液压控制系统》.doc
- 毕业论文·设计《基于proe实现发动机的仿真和分析》.doc
- GB/T 32151.38-2024温室气体排放核算与报告要求 第38 部分:水泥制品生产企业.pdf
- 中国国家标准 GB/T 32151.38-2024温室气体排放核算与报告要求 第38 部分:水泥制品生产企业.pdf
- 《GB/T 22069-2024燃气发动机驱动空调(热泵)机组》.pdf
- GB/T 22069-2024燃气发动机驱动空调(热泵)机组.pdf
- 中国国家标准 GB/T 22069-2024燃气发动机驱动空调(热泵)机组.pdf
- 中国国家标准 GB/T 11064.1-2024碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第1部分: 碳酸锂含量的测定 滴定法.pdf
- GB/T 11064.1-2024碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第1部分: 碳酸锂含量的测定 滴定法.pdf
- 《GB/T 11064.1-2024碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第1部分: 碳酸锂含量的测定 滴定法》.pdf
- GB/T 1148-2024内燃机 铝活塞.pdf
- 中国国家标准 GB/T 1148-2024内燃机 铝活塞.pdf
文档评论(0)