c1372-98中文版-拼装式挡土墙砌块单元的标准规范.docVIP

C 1372 PAGE 916 Designation: C 1372-98编号： C 1372-98 PAGE 915 Standard Specification for Segmental Retaining Wall Units This specification is under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and is the direct responsibility of C15.O3 on Concrete Masonry Units and Related Units.本试验方法受ASTM委员会C-15制造砌块委员会管辖，并且由C15.03 This specification is under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and is the direct responsibility of C15.O3 on Concrete Masonry Units and Related Units.本试验方法受ASTM委员会C-15制造砌块委员会管辖，并且由C15.03混凝土砌块及相关单位分委会直接负责。Current edition approved May 10, 1998. Published November 1998. Originally published as C 1372-97. Last previous edition C 1372-97.现行版本于1998年5月10日批准，并于1998年11月出版。最初版本编号为C 1372-97，上一版本编号为C 1372-97。 This standard is issued under the fixed designation C 1372; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 1372刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope 1.1 This specification covers segmental retaining wall units of concrete, machine-made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials. The units are intended for use in the construction of mortarless segmental retaining walls.本规范包含由波特兰（硅酸盐）水泥、水和相配的矿质骨料（有或无夹杂其他材料）机制的混凝土拼装式挡土墙砌块单元。这些砌块单元被用在无灰浆拼装式挡土墙的结构上。 Note 1—When particular features are desired, such as weight classification, higher compressive strength, surface texture, finish, color, or other special features, such properties should be specified separately by the purchaser. Local suppliers should be consulted as to availability of units having the desired features.注1——当需要特殊特征时，比如重量分类、较高抗压强度、表面纹理、饰面、颜色或其他特别特征，买方应分别规定此类性