c870-96中文版-热绝缘材料的温湿度标准规范.docVIP

C 870 PAGE 445 Designation编号: C 870 - 96 PAGE 439 Standard Practice forConditioning of Thermal Insulating Materials This practice is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C 16.31 on Chemical and Physical Properties.Current edition approved Dec. 10, 1996. Published February 1997. Originally published as C 870 - 77. Last previous edition C 870 - 77. This practice is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C 16.31 on Chemical and Physical Properties.Current edition approved Dec. 10, 1996. Published February 1997. Originally published as C 870 - 77. Last previous edition C 870 - 77.本规范由ASTM委员会C-16隔热分委会管辖，并由C16.31衬垫和松散填充绝缘材料分委会直接负责。现行版本于1996年12月10日批准，并于1997年2月出版。最初版本为C 热绝缘材料的温湿度标准规范1 This standard is issued under the fixed designation C 870; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (c) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 870刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 This practice covers the conditioning of thermal insulating materials for tests. Since prior exposure of insulating materials to high or low humidity may affect the equilibrium moisture content, a procedure is also given for preconditioning the materials.本规范涵盖了试验用绝热材料的调湿。由于预先将绝热材料曝露于高湿度或低湿度会影响平衡含水率，本规范也给出了材料预调湿的程序。 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.本标准并非旨在解决所有与标准使用相关的安全问题（如有）。本标准使用者有责任确立适用的安全和健康规范并在使用前评估其是否符合有关条例。 2. Refere