自动抛光机毕业设计.docxVIP

自动抛光机毕业设计 【篇一：抛光机毕业设计】 毕业设计（论文）任务书 【篇二：毕业设计抛光机】 摘要 本文通过调研国内外现有型材机械抛光机械的使用情况，在综合分 析各自优点的基础上，通过自主创新研制出一种新型型材抛光机。 铝型材机械扫纹方法是利用型材在挤压时效之后，通过一台专用的 机械扫纹设备，将同规格的铝型材有规则地平放在扫纹机工作台上， 选择适当的工作台行走速度。通过扫纹轮与铝型材表面触压和高速 干磨擦 （无需任何扫纹剂 ）, 从而达到彻底消除型材表面挤压纹的方法。 而铝型材的机械扫纹质量效果，取决于使用扫纹轮的材质、扫纹的 压下量、扫纹次数和扫纹工作台的移动速度。本文设计的型材抛光 机能够适应不同截面形状型材抛光的要求，具有抛光面积大、抛光 质量好、工作效率高的特点，对实现型材抛光机械化具有很高的现 实意义，促进了型材加工行业机械化发展。 关键词：型材，抛光，机械扫纹，机械化 abstract in this paper, through the use of research domestic and foreign existing profiles mechanical polishing machine, on the basis of comprehensive analysis of their respective advantages, through independent innovation to develop a new kind of profile polishing machine. aluminum mechanical scanning lines after the limitation of the extrusion method is to use the profile through a dedicated mechanical scanning lines equipment, with specifications of the aluminum will be regularly swept flat on grain machine workbench, select the appropriate workbench walking speed. sweep through grain wheel and aluminum surface contact pressure and high speed dry friction （no scan lines）, so as to eliminate surface profiles extrusion lines. and aluminum mechanical sweeping effect of grain quality, depends on using sweep tightener material, quantity of the scanning lines, flicking grain number and grain worktable movement speed. profile polishing machine designed in this paper can adapt to the requirement of different shape of cross section profile polishing, polishing polishing area is large, good quality, high efficiency characteristics, to achieve material polishing mechanization has very high practical significance, and promoted the development profile processing industry mechanization. keyword ： profiles, polishing, mechanical scanning lines, mechanization 目录 摘 要 i abstract i 1绪 论 1 引 1 国内外铝合金型材发展现 TOC \o 1-5 \h \z 状 3 国外研究现 状 3 国内研究现 状 3 研究的目的和意 义 5 研究内 容 5 技术路 线 6 本章小 结 7 异型材抛光机总体方案设计研 究 整机设计原 则 .. 7 设计方案确 定 .. 7 铝型材的形 状 抛光方案的确 定 总体结构设 计