水陆两用摩托艇设计说明书.docxVIP

PAGE \* ROMAN PAGE \* ROMAN II 水陆两用摩托艇设计 摘 要 现在人们常用的传统摩托艇下水方式繁琐，一般小型摩托艇需要两至三人才能把它弄下水，而且需要借助外界的工具才行，上岸时候更加困难有时需要加上机器才可以把摩托艇拖上岸。因此我通过设计水陆两用摩托艇来解决这一问题。在陆地上可以做为日常的家用短途代步工具，在水中可以作为摩托艇使用，并且前轮和后轮可以收起以减少在水中的阻力从而使得摩托艇在水中前进的更快一点。 本设计主要釆用的设计流程及设计方法是:査阅图书馆资料及上网査阅资料等多种途径进行前期调研, 由于国内对水陆两用摩托艇这类产品的介绍以及了解都不是那么多，所以在查阅资料时要更多的翻阅国外的网站杂志等，并对结果进行深入分析, 形成调研总结; 根据调研结果开始进行对产品的意象以及概念做出调整, 通过草绘、 建立草模等方式做出 3 个方案。通过详尽的思考比较，从中选择最优的方案完善细节，能对外观色彩等方面经行研究、比较、选择，不断完善水陆两用摩托艇的造型和各个方面的设计然后利用三维建模软件对方案进一步完善改良，做出最后的水陆两用摩托艇设计。在最后设计出水陆两用摩托艇之后，对产品的造型再进一步的优化从而得到更好的设计，更完善的摩托艇设计。 关键词：交通工具；摩托艇；水陆两用 ABSTRACT Traditional motor boat launching trival, general small motorboat need two to three people to get it into the water, but they only want to be with the tools of the outside world, ashore when more difficult sometimes need to add machines that can pull the motorboat. So the use of water and water motorboats is designed to simplify the way the water is launched and his daily maintenance, allowing amphibious motorboats to be used as a family motorboat. On land can serve as a home for daily short-distance transport, can be used as a motor boat in the water, and front and rear wheels can be folded up in order to reduce the resistance in the water so as to make the motor boat in the water forward faster. This design mainly adopt the design process and design method is: access to the library information and Internet access to information, and other ways of research because of domestic amphibious motor this kind of product introduction and understanding is not so much, so when access to information through to more foreign web magazine, etc., and the results are in-depth analysis, form research summary; According to the results of the survey, the image and concept of the product were adjusted, and three schemes were made by using grass drawing and building grass mold. Through detailed thinking comparison, select the optimal scheme of perfect details, to the color appearance, etc by the line of research, comparison