吹塑成型过程.pptVIP

tt Blow molding process 主讲人：杨崇岭 Left: The CBF process starts with upward extrusion of a “dose”. Right: The dose is sliced off by a rotating tool and deposited in a compression molding cavity on another wheel. CBF machines combine elements of compression moulding and blow moulding in a continuous rotary process. CBF uses an integrated in-line sequence that does not require station-to-station transfer. Material is extruded, cut and transferred into a compression cavity. A preform is produced, and bottles are then pre-blown before the blow mould cavity closes over the preform. Then, the mo