计数型RR之讲解与达用表格.pptVIP

* * * * * * * * * * * * * SUNON Nan Hai Plant Attribute Measurement Systems 計數型測量系統 Attribute Terminology 計數術語 Attribute Data:計數型數據 ☆ Qualitative(go/no go) data that can be counted for recording and analysis 可用作記錄或分析的定性數據(通常為合格/不合格) Attribute Measurement System(AMS):計數型測量系統 ☆ A measurement system that compares a product to a standard and accepts the product if in meets the standard . 將每一產品與標準對比,如果符合標準的要求則接受 ☆ Can be inspected by an inspection or by using a go/no go gauge 可由檢驗員或合格/不合格量規來實施檢查 Screen:篩選 ☆ 100% inspection using an AMS 用計數測量系統百分百評價產品 Attribute Terminology 計數術語 Screen Effectiveness:篩選效率 ☆ The ability of the AMS to discriminate good from bad AMS 區分合格與不合格產品的能力 Customer Bias : 客戶偏好 ☆ Screening criteria is too tight:Good product is being rejected 篩選標準太嚴格:合格產品被拒收 Producer Bias:生產者偏好 ☆ Screening criteria is too loose:Defective product is being accepted 篩選標準太寬鬆:不合格產品被接收 The Purpose of Attribute R R計數值R R的目的 To understand if workers across all shifts,machines and lines use the same criteria to determine “pass” or “fail” 確定各班次、各機器、各流水線的檢驗員是否用同一標準區分 合格與不合格. To quantify the ability of inspectors or gauges to repeat their inspection results and conclusions 量化測量者或測量儀器是否能正確重复檢驗結果的能力 The Purpose of Attribute R R計數值R R的目的 To understand the level of conformance to a standard 確定檢驗員/量儀符合標準的程度,包括: ☆ The frequency where inspectors ship truly defective product (Producer Bias) 檢驗員接受不合格產品的概率 ☆ The frequency where inspectors do not ship truly acceptable Product (Customer Bias) 檢驗員拒收合格品產品的概率 The Purpose of Attribute R R計數值R R的目的 Identify the following:識別以下各項 ☆ Training need (Individual(s) or for all) 培訓需求(個別或全部檢驗員) ☆ The lack of documented procedures or control plans 缺少程序或控制計劃 ☆ Whether standards are clearly defined 標準沒