AS2891.1.3-2008 国外国际规范.pdfVIP

1 AS 2891.1.3—2008 ® A Australian Standard S 2 8 9 1 . 1 Methods of sampling and testing asphalt . 3 — 2 0 Method 1.3: Sampling—Asphalt from slabs 0 8 PREFACE This Standard was prepared by the Standards Australia Committee CE-006, Asphalt and Sprayed Surfacing, to supersede, in part, AS 2891.1—1986, Methods of sampling and testing asphalt, Method 1: Sampling of asphalt . METHOD 1 SCOPE This Standard sets out methods for obtaining slabs of compacted asphalt from pavements and preparing the slabs for testing. The Standard does not include methods of sampling asphalt that has been placed but not compacted on a pavement and does not address the selection of sampling sites. 2 DEFINITIONS For the purpose of this Standard, the definitions below apply. 2.1 Asphalt A mixture of bituminous binder and aggregate with or without mineral filler. 2.2 Sample 8 0 A material to be forwarded for examination and/or testing. 0 2 l u J 2 3 APPARATUS 1 n o A The following apparatus is required: I L A (a) Sawing machine A saw with diamond cutting tee