Construction_StairwaysandLadders梯子和过道安全.ppt

Reducing or Eliminating Hazards – Remove defective ladders from service ? Broken or missing parts ? Corrosion ? Other faulty or defective components – “Do Not Use” – Repair to original design criteria Source: OSHA PPT 10-hr. Construction – Stairways and Ladders v.05.18.15 21 Created by OTIEC Outreach Resources Workgroup Reducing or Eliminating Hazards ? Stairs – Handrails – Stair rail systems – Stair requirements – Temporary pan stairs Source: OSHA PPT 10-hr. Construction – Stairways and Ladders v.05.18.15 22 Created by OTIEC Outreach Resources Workgroup Reducing or eliminating hazards ? Install handrail on stairways – 4 or more risers – 30 inches of rise Source: OSHA PPT 10-hr. Construction – Stairways and Ladders v.05.18.15 23 Created by OTIEC Outreach Resources Workgroup Reducing or eliminating hazards ? Install stair rail system – Toprail, mid-rail, and sometimes a toeboard – Unprotected sides and edges of stairs with rise of 6 or more feet Source: OSHA PPT 10-hr. Construction – Stairways and Ladders v.05.18.15 24 Created by OTIEC Outreach Resources Workgroup Reducing or eliminating hazards ? Build/maintain stairs that meet OSHA requirements – – – – – Uniform riser height and tread depth 30 to 50 degrees angle Landings every 12 feet Remove projections Correct slippery conditions Source: OSHA No more than 1/4 inch variation in any stairway system Source: OSHA PPT 10-hr. Construction – Stairways and Ladders v.05.18.15 25 Created by OTIEC Outreach Resources Workgroup Reducing or eliminating hazards ? Temporary pan stairs – Secure in place before filling – Fill to top edge – Replace worn treads and landings Source: OSHA PPT 10-hr. Construction – Stairways and Ladders v.05.18.15 26 Created by OTIEC Outreach Resources Workgroup Stairways and Ladders 10-hour Construction Outreach PPT 10-hr. Construction – Stairways and Ladders v.05.18.15 1 Created by OTIEC Outreac