沐浴露喷嘴注塑模设计.docVIP

PAGE PAGE I PAGE I 沐浴露喷嘴注塑模设计 摘 要 毕业设计对于我们学设计的人来说，就是需要我们将所学的所有知识结合起来运用，在老师的指导下独立完成一次设计，是一次理论与实践相结合的挑战。此次我毕业设计的课题是沐浴露喷嘴注塑模。 按照老师的要求，此次毕业设计课题我取材于生活，实用性强。设计的主要任务是以沐浴露喷嘴为素材，设计出一副符合原理、结构完整的注塑模模具。通过此次设计能加强我对注塑模具成型原理的理解，对注塑成型模具的设计和制造能力。 此次毕业设计以沐浴露喷嘴为设计素材，通过对塑件的材料分析、结构工艺分析以及必要的数据计算，确定最终的模具结构类型、浇注系统、冷却系统、成型系统、推出机构等。此次设计，沿用了以往模具课程设计的一般方法、步骤以及模具设计中常用的公式、数据、模具结构及零部件，综合、、、等绘图办公软件的运用，大大提高了工作效率。这一系列的设计过程，很好的把所学的知识综合运用了起来，达到了学以致用的效果。 当然，由于经验及理论知识的缺乏，在设计过程中也遇到了不少困难，但我借助于网络、书籍以及老师的指导帮助，以力求更好的态度完成了本次毕业设计。 关键词：分型面、浇注系统、侧抽芯、冷却系统、推出机构。 PAGE PAGE II ABSTRACT ?Graduation design?for?us,?it needs us to learn?all the knowledge?to combine the use,?to complete a?design independently?under the guidance of the teacher,?is a?combination of theory and practice?challenges.?The?graduation project is a?shower?nozzle?injection mold.. According to the requirements of the teacher, I drew the graduation design?topic from life,?strong practicability.?The major task of this design is?based on the?shower?nozzle,?designed a?injection mold,?with?principle of?structural integrity. Through this?design can?enhance? my understanding of the?principle?of?injection mold,?injection?mold design and manufacturing?capability. The graduation design?to?shower?nozzle?for the design of?material,? plastic parts of the?material analysis,?structure?analysis and?calculation?process of?the necessary data,?determined the mold structure?types,?the?gating system,?cooling system, molding system,?pushing mechanism?etc..?This design is?following the general method of the?mould design?process and?die design?commonly used?formula,?data, the die structure and?components,?using?、、、and other graphics?software,?can greatly improve the work efficiency.?The design process?of this series is very good to us to comprehensive use the learned knowledge,?to?learn in order to practice. Of course,?due to?the lack of?experience and knowledge,?in the design process also encountered many difficulties,?but I?rely on the Internet,?books and?