农机底盘结构与维修 任务3变速器的检修 变速箱.pptVIP

Gearbox (4 gear - 3 range) - 1st speed - Low range Gearbox (4 gear - 3 range) - 2nd speed - Low range Gearbox (4 gear - 3 range) - 3rd speed - Low range Gearbox (4 gear - 3 range) - 4th speed - Low range Gearbox (4 gear - 3 range) - 1st speed - Medium range Gearbox (4 gear - 3 range) - 2nd speed - Medium range Gearbox (4 gear - 3 range) - 3rd speed - Medium range Gearbox (4 gear - 3 range) - 4th speed - Medium range Gearbox (4 gear - 3 range) - 1st speed - High range Gearbox (4 gear - 3 range) - 2nd speed - High range Gearbox (4 gear - 3 range) - 3rd speed - High range Gearbox (4 gear - 3 range) - 4th speed - High range 21.3 Gearbox Disassembly Workshop 21.4 Gearbox Adjustment Driving Shaft Axial Clearance Shim S1 available: 3.00 - 3.25 - 3.50 - 3.75 - 4.00 mm Shim S1 Driving Shaft Axial Clearance On bench, mount all components on driving shaft with tool 50007 in place of the two rear bearings and the adjuster ring. Measure tool 50007 thickness (C) By a feeler gauge, measure the clearance H. Measure inner bearing thickness A. Measure outer bearing thickness B. Driving Shaft Axial Clearance Measure clearance H Measure inner bearing thickness A Measure outer bearing thickness B Driving Shaft Axial Clearance The adjuster shim to be fitted is given by S1 = H + [ C - ( A + B ) ] allowed tolerance 0 ÷ 0.25 mm Tool 50007 Tool to be made for adjusting the driving-shaft. Measures in mm Driving Shaft Axial Clearance Shim S available: 1.00 to 3.50 step 0.05 mm Shim S Driving Shaft Axial Clearance On bench, mount all components on driving shaft without the adjuster ring. By a feeler gauge, measure the gap between the bearing and circlip. Choose a proper shim to obtain 0.0 ÷ 0.1 mm clearance. No Adjustment Required For this gearbox no adjustement is required. Training 21.1 Gearbox Specification Gearbox and Range gear (12+4) 4 gear 3 range Shuttle not synchronized Reverser (12+12) 4 gear 3 range Synchronized Mechanical Shuttle Gearbox and Range gear (12+4) - Controls RANGE