路由知识讲解.ppt

路由;Routing Overview;Fabric Terminology;Routing Terminology;Eight Virtual Channels (queues) are used per ISL Used to solve traffic congestion by interleaving frames VC0 – Class F: Link Control Frames VC1 – Class Two: ACKS and F_RJT (Frame reject) , Link Control VC2 thru VC5 – Data Frames VC6 – Multicast Traffic VC7 – Broadcast Traffic ;8 Gbit/sec Switch and Director Virtual Channel Model (Condor2/GoldenEye2 based );;Set the preferred Principal Switch priority using fabricprincipal [-f] 1 (v4.x and later) -f forces a fabric rebuild after enabling on a switch The selection process is Check the priority setting on all switches If only one is set, it becomes the Principal Switch If more than one is set, the switch with the lowest WWN of these will be the Principal Switch If priority is equal, the switch with the lowest WWN becomes Principal Switch Brocade generally recommends that when using a Core/Edge topology, a switch in the core be designated as the preferred Principal Switch – particularly if the switch is a SilkWorm Director RSL_SWT121:root fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name ------------------------------------------------------------------------- 2: fffc02 10:00:00:60:69:80:04:5e 10.255.255.121 0.0.0.0 RSL_SWT121 129: fffc81 10:00:00:60:69:80:05:1c 10.255.255.129 0.0.0.0 RSL_SWT129 153: fffc99 10:00:00:60:69:50:0d:d6 10.255.255.153 0.0.0.0 RSL_SWT153 157: fffc9d 10:00:00:60:69:51:2d:57 10.255.255.157 0.0.0.0 RSL_SWT157“;FSPF – Fabric Shortest Path First;FSFP Routing Policies ;FSPF Example;Port-Based Routing Policy;Port Based Routing;Port Based Routing (cont.);Port-Based Routing and DLS;Exchange-based Routing;1;Exchange-based Routing (cont.);Exchange-Based Routing and DLS;Routing Policy Selection;Display Routing Information Overview;fcping Command;fcping Example;pathinfo;pathinfo (cont.);topologyshow v4.x, v5.x, v6.x; sw1:admin urouteshow Local Domain ID: 1 In Port