左摆动杠杆的加工工艺及夹具设计.docVIP

左摆动杠杆的加工工艺及夹具设计 摘 要：近年来，在中国汽车市场发展的迅速，中国汽车的销售量已经连续多年在全球销量第一。得利于近年来汽车市场的很好的向上趋势;再加上，汽车发动机是汽车动力的来源，相当于汽车的心脏，决定了汽车的动力性能、安全性能、环保程度、以及经济性能，所以国内的汽车发动机市场发展迅速，对于其中核心零件左右摆杆的研究显得尤为必要。按照毕设设计任务书的具体要求，在本文中对汽车发动机中的左摆动杠杆加工工艺及其专用夹具为对象完成设计并对具体的设计过程予以说明。主要内容包括左摆动杠杆加工工艺工艺方案的l 关键词：左摆动杠杆;加工工艺;切削用量;夹具设计 Abstract According to the specific requirements of the design task book, in this paper, the left swing lever processing technology and its special fixture are designed for the object and the specific design process is explained. The main contents include the formulation of the left swing lever machining process, the selection of the combined machine configuration, the overall design and the fixture design. In this article, the design of the left swing lever machining process and its special fixture consists of two parts, one is the combined left swing lever machining process part, and the other is the design part of the special fixture. In the process of formulating the process, it is necessary to determine the installation station of each process and the steps required for the process, the feed rate of the locomotive and the machine tool for processing the process, the depth of cut, the spindle speed and the cutting speed, the jig of the process, the tool and The measuring tool, as well as the number of passes and the length of the pass, the adoption of the positioning scheme of the workpiece, and finally calculates the basic time of the process, the auxiliary time and the service time of the work place. The fixture design for the corresponding process, the positioning scheme used for the fixture design, the feasibility analysis of the solution, and the assembly drawing and multi-view of each part. Through the structural analysis of the left swing lever part, the process design is carried out in combination with the actual processing equipment, the blank material, size, positioning reference, processing content and process flow of the part are determined, and the processing