可靠度测试列表.docxVIP

Item Test Con diti on Test Sta ndard System Reliability Test High Relative Humidity Test 60 C /90%RH,68 Hour GR-63 4.1.2 High Temperature Operat ing 60 C ,72 Hour GR-63 4.1.1 High Temperature Power Cycli ng 60 C for at least 2 hour, then power cycle 200 times, on/off period 60 sec. Customized Low temperature Operat ing -40 C ,72 Hour GR-63 4.1.1 Normal Temperature Operat ing 25 C /60%RH,1000 Hour Customized Temperature Cycli ng -40 C to 60 C ,2 Hour dwell, 2 Hour ramps GR-63 4.1.1 Drop Test Set UUT over board of 10mm thick ness and the distanee is 10cm,then UUT be dropped on the board by 6 face/4 times GR-63 4.3.1 Pack ing Drop Test Set UUT over concrete and the distanee is 60cm/weight10kg,55cm/ weight 10 ?20kg or 45cm/ weight 20 ?30kg,then UUT be dropped on the con crete by 6 face/8 corner GR-63 4.3.1 Vibratio n Test(Low freque ncy/ra ndom) 5-10H z, 3dB/octave,10-500Hz, 0.018g2/Hz,3 axis,60 min/axis, ? 3Grms,10-25Hz,2mm Amplitude,1Cycle/Min,X,Y ,Z direction vibrated 2 Hour each GR-63 4.4.4 Pack ing Vibrati on Test 10-20Hz,2mm Amplitude,1Cycle/Min,X,Y ,Z directi on vibrated 1 Hour each GR-63 4.4.4 ESD Test ESD Voltage: 15KV/20KV,discharge 150PF/100ohm,discharge cycle, plus/minus 60 cycle(15KV)/30cycle(20kv) GR-63 4.5.1 Thermal Shock Test -40 C to 85 C ,20 C /min ramp,1 Hour dwell,50 cycle GR-63 4.1.1 Vibratio n Test(Middle freque ncy/ra ndom) 5-500H z,0.005g2/H z,3 axis,90 min /axis, ? 1.6Grms GR-63 4.4.4 Vibration Test(Shock) 50G,half-sine,11ms duration,3 times,3 orthogonal axis, both directi on s,18 shocks total GR-63 4.4.4 Surge Test Standard 0.5 *-100KHz ring wave,6KV IEEE C62.41-1991 Sta ndard 1.2/50 ps-8/20 g comb in ati on wave,6KV gQbal GLOBAL Technology Inc. Reliability Test List Reliability Test List Optical Comp onent Reliability Test Vibratio n 20-2000Hz,20 Gpeak/1.5mm,1mm,X,Y ,Z Axe,4 min /cycle,4 cycle/axe MIL-STD-883E Method 2007,GR-468 4.3.2 Temperature Cycli ng -40 C /10min ?+85 C /10min,1000 cycle MIL-STD-883E Method 2007,GR-468 4.3.2 CTH(Cycl.Tem