热冲压成形的进展及方向探讨.pdfVIP

Indirect Press-hardening with Multi-Layer Chamber Furnace 多层厢式炉间接热成型技术研究 Charles Chen Cencera Cooperation 浙江中硅新材料有限公司 Introduction ⚫ Comparing indirect press hardening versus direct press hardening The press hardening process currently exists in two different main variants: the direct and the indirect press hardening method. In the direct press hardening process, a blank is heated up in a furnace, transferred to the press and subsequently formed and quenched in the die. 2 Introduction ⚫ Direct press hardening Mass production; Blast shot and laser cutting are needed. 3 Introduction ⚫ Indirect press hardening The indirect hot stamping process is characterized by the use of a nearly complete cold pre-formed part which is subjected only to a quenching and calibration operation in the press after austenitization. 4 Introduction ⚫ Indirect press hardening process very complex geometry and big parts possible; unristricted applicability for cold forming; versatile material options; no more needs laser cut; reduces the operation cost. 5 Introduction ⚫ Indirect press hardening In indirect press hardening process, the preformed workpiece is mounted on the saddle which is fixed on the carrier. These parts are handled as one assembly. Then the assembly is put into the furnace heated up to about 1000 °C. The assembly is then moved out of the furnace. The gripper takes the workpieces from the