浅析冷轧带钢精整工艺及包装设备操作.docxVIP

本科毕业论文 题目: 浅析冷轧带钢精整工艺及包装设备操作 专题: 专 业：冶金工程班 级： 姓 名： 学 号： 指导教师： 论文共」^页，其中：专题 页，译文页 浅析冷轧带钢精整工艺及包装设备操作 摘要 冷轧板带材产站是板带材生产的最终产詁，而冷轧板带材的精整工艺是提高 产品质量的重要途径，其作用已显得越来越突出。冷轧厂屮最后一道工序是精整, 是保证产品质量的关键。精整的H的，主要在于控制成品的力学性能和工艺性能, 控制成詁的精确厚度和良好的板形以获得高质量性能和表面状态的成詁。精整效 果的好坏就成为了产品质量的关键，因此我们有必要将整个精整工艺及设备进行 简单的论述。 精整工序是使冷轧带钢成为交货状态产詁的重要生产工艺过程，它由带钢平 整机组、横切机组、纵切机组、重卷机组等组成，各机组最后一个工序都是用打 包机对产品进行打包验收完成最终的生产过程。因此本文结合武钢冷轧薄板总厂 精整车间生产经验，重点对冷轧板带材的包装设备钢带打捆机等进行研究，进而 解决如何提高板带材包装质量的问题。 关键词：精整，钢带打捆机，冷轧带钢 Analysis of cold-rolled steel finishing process and packagingequipment Abstract Cold rolled strip of plate and strip products are the final products of wood production, and cold rolled strip finishing the process is to improve the product quality of an important way, its role has become increasingly prominent. Cold Rolling Mill in the final process is finishing, is the key to ensure product quality. The finishing main purpose is to control the mechanical properties of finished product and process performance, precise control of the thickness of the finished product and a good shape to obtain high-quality performance and the finished surface. The quality of finishing the effect of product quality has become a key, so we need to finish the whole process and equipment exposition simple. Finishing process is to deliver a state of cold-rolled steel products to become an important production process, its formation by the strip units, cross-cutting units, longitudinal units, heavy units, such as volumes, each unit is the last process to use product packaging balers final acceptance of the production process. Therefore this paper WISCO precision cold-rollcd sheet plant intcr-vchiclc production experience, with a focus on cold rolled strip steel packaging equipment, packaging machines, such as research, and resolve how to improve the quality of board with the problem of packaging material. Key words： Finishing, strip packaging machines, cold rolled strip 将品 目录 TOC \o 1-5 \h \z \o Current Document 1绪论 1 1.1板带材精整的背