主跨60m悬臂现浇预应力混凝土连续梁桥.docVIP

悬臂现浇预应力混凝土连续梁桥 摘要 本次毕业设计是一座三跨悬臂现浇预应力钢筋混凝土连续梁桥设计，跨径为37.5m+37.5m+60m，横桥向宽度为17m，横坡为2%，双向四车道，荷载等级为公路 = 1 \* ROMAN I级。主梁采用单箱双室整体现浇箱梁，主梁采用变高度梁，高度曲线为圆曲线，支点处梁高为3.5m，顶板厚0.3m，顶板厚度全桥不变，底板厚为0.5m，腹板厚为0.7m，跨中处梁高为1.9m，底板厚为0.5m，腹板厚为0.7m。悬臂端长度均为0.28m。本桥采用悬臂施工的施工方法，其主要特点是施工方法简单可行，施工质量可靠，施工工艺成熟 本设计的主要目的是让我们熟练掌握桥梁设计的计算，学会桥梁绘图和相关软件桥梁博士和CAD的使用，加深我们对基础理论的理解，扩大专业知识面，培养我们严谨的科学态度和实事求是的作风，提高我们综合分析问题、创新等方面的能力。 关键词：预应力钢筋混凝土；变高度；连续梁桥；桥梁博士；CAD Cantilever cast-in-place prestressed concrete continuous girder bridge Abstract This graduation design is a three span cantilever cast-in-place prestressed concrete continuous girder bridge design, the span 37.5 m + 37.5 m + 60 m, cross the bridge to the width of 17 m, cross slope is 2%, four lanes, load level for highway grade I. Double room with one box girder integral cast-in-place box girder, the girders with variable height beam, height curve for circular curve, pivot beam at high of 3.5 m, 0.3 m thick roof, roof thickness of the whole bridge is changeless, bottom plate thickness of 0.5 m, web plate thickness of 0.7 m, across the beam in 1.9 m high, bottom plate thickness of 0.5 m, web plate thickness of 0.7 m. The cantilever length is 0.28 m. This bridge cantilever construction of construction method, its main characteristic is simple and feasible construction methods, construction quality is reliable, mature construction technology The main purpose of this design is to make us master the calculation of bridge design, learn to Dr Bridge bridge drawing and related software and the use of CAD, deepen our understanding of the basic theory and expand the professional knowledge, cultivate our rigorous scientific attitude and practical and realistic style of work, improve our comprehensive analysis of problems, such as innovation ability. Keywords: prestressed concrete；variable height；continuous girder brige； Dr bridge；CAD 目录 TOC \o 1-3 \h \u 13859 摘要 I 30817 Abstract