双语教学资源其他书籍（双语文字稿）5-铁路工程结构混凝土强度检测规程.docVIP

Contents 目次 1 General Provisions 1总则 2 Terms and Symbols 2术语和符号 2. 1 Terms 2.1术语 2. 2 Symbols 2.2符号 3 Basic Requirements 3基本规定 4 Core Drilling Method 4钻芯法 4. 1 General Requirements 4.1一般规定 4. 2 Main Instruments 4.2主要仪器设备 4. 3 Core Drilling and Process 4.3芯样钻取及加工 4. 4 Strength Test of Core Sample 4.4芯样强度试验 4. 5 The Conversion and Presumption of Concrete Strength 4.5混凝土强度换算及推定 5 Rebound Hammer Method 5回弹法 5. 1 General Requirements 5.1一般规定 5. 2 Rebound Hammer 5.2回弹仪 5. 3 Rebound Testing 5.3回弹试验 5. 4 The Conversion and Presumption of Concrete Strength 5.4混凝土强度换算及推定 6 Ultrasonic-rebound Combined Method 6超声回弹综合法 6. 1 General Requirements 6.1一般规定 6. 2 Main Instruments 6.2主要仪器设备 6. 3 Ultrasonic-rebound Test 6.3超声回弹试验 6. 4 The Conversion and Presumption of Concrete Strength 6.4混凝土强度换算及推定 7 Pull-out Post-insert Method 7后装拔出法 7. 1 General Requirements 7.1一般规定 7. 2 Test Apparatus for Pull-out Post-insert 7.2后装拔出试验装置 7. 3 Pull-out Post-insert Test 7.3后装拔出试验 7. 4 The Conversion and Presumption of Concrete Compressive Strength 7.4混凝土抗压强度换算及推定 8 Method for Curing Specimen under Same Conditions 8同条件养护试件法 8. 1 General Requirements 8.1一般规定 8. 2 Preservation and Curing of Test specimen under Same Conditions 8.2同条件养护试件的留置和养护 8. 3 Equivalent Curing Age 8.3等效养护龄期 8. 4 Reduction and Evaluation of Concrete Strength 8.4混凝土强度折算和评定 Appendix A Site Operation Records of Inspection by Core Drilling Method 附录A钻芯法检测现场操作记录 Appendix B End Face Reinforcement for Core Sample by Core Drilling Method 附录B钻芯法芯样端面补平方法 Appendix C Test Records of Core Sample Compressive Strength and Test Report on Core Drilling Method 附录C芯样抗压强度试验记录和钻芯法试验报告 Appendix D Modified Value of Rebound Value under Non-horizontal Condition Testing with Rebound Method 附录D回弹法非水平状态检测时回弹值的修正值 Appendix E Modified Value of Rebound Values on Various Concreting Surfaces with Rebound Method 附录E回弹法不同浇筑面上回弹值的修正值 Appendix F Establishment of Spe