讲义参考教程案例.pptxVIP

Symantec NetBackup 5330 Appliance Hardware: Installation and Parts Replacement;;After completing this topic, you will be able to identify and describe the commands that are available in the RMM4 utility and their purpose.;Maintenance connections;Using a standard video cable, connect a computer monitor to the VGA port located in the rear of the appliance. Connect a keyboard to a USB port on the appliance. Restart the appliance Enter BIOS by pressing F2 on the keyboard Use the arrow keys to navigate to “Server Management” Then scroll down to “BMC Lan Configuration” In the BMC Lan Configuration section, navigate to the RMM4 lan configuration section Making sure the IP source is set to static, make appropriate changes to the IPAddress, Subnet Mask and Gateway IP The default username is sysadmin and the password is P@ssw0rd (without quotes). Press F10 to save changes and exit BIOS Select YES in the confirmation message. The appliance should restart. ;SRM (RMM4) BIOS Configuration;?The following client Internet browsers have been tested: Microsoft Internet Explorer 8.0 and later Mozilla Firefox 15.0 and later;Symantec Remote Management Login Page;Symantec Remote Management System Information;Configuration - IPv4 Network Settings Page;;Configuration - IPv6 Page;Configuration - IPv6 Network Settings Options;End of Presentation