毕业设计（论文）-X62X1万能铣床的电气控制系统设计.doc

黄河科技学院毕业设计（论文） 第 PAGE 1 页 X62X1万能铣床的电气控制系统设计 摘要 X62X1万能铣床是一种高效率的加工机械，在机械加工和机械修理中得到广泛的应用，万能铣床的操作是通过机械手柄同时操作电气与机械，以达到机电紧密配合完成预定的操作，是机械与电气结构联合动作的典型控制，是自动化程度较高的组合机床。但是在电气控制系统中，故障的查找与排除是非常困难的，特别是在继电器接触式控制系统，由于电气控制线路触点多、线路复杂、故障率高、检修周期长，给生产与维护带来诸多不便，严重地影响生产。PLC专为工业环境应用而设计，其显著的特点之一就是可靠性高，抗干扰能力强。将X62X1万能铣床电气控制线路改造为可编程控制器控制，并用三菱CPU对系统运行情况进行显示，工作状态一目了然，既可以提高整个电气控制系统的工作性能，又减少维护、维修的工作量。PLC控制系统无论是硬件还是软件，控制稳定可靠，具有极高的可靠性与灵活性。 关键词：万能铣床，PLC，改造 全套图纸加扣 3346389411或3012250582 The Design Of X62X1 Universal Milling’ Electrical Control System Abstract X62X1 universal milling machines is a highly efficient manufacturing machinery, It is have a broad application in the processing machinery and mechanical repairs . the operation of universal milling machines is through mechanical and electrical simultaneously handle mechanical, to achieve the electrical and mechanical work closely with the scheduled completion of the operation, is the typical control of mechanical and Joint action of the electrical structure , is a higher degree of automation is a combination of machine tools. But in the electrical control system, it is very difficult to find the failure and remove, especially in the relay contact control systems, due to the electrical control circuits have more contact, complex lines, the high failure rate, long cycle maintenance, to brought a lot of inconvenience in the production and maintenance, so as seriously affecting production. PLC is applications design for industrial environmental, it’s one of the notable features is high reliability, strong anti-interference capability. Shall the X62W universal milling machines electrical control transformation to circuits of programmable logic controller for control and display text with Mitsubishi cpu operation of the system to show that working conditions at a glance, it can improve the electrical control system performance, reduce maintenance, and repair w