ucos-ii到arm的移植文档.docVIP

摘要 洛阳理工学院毕业设计（论文） PAGE IV PAGE 2 uC/OS-II到ARM的移植 摘 要 随着科技的进步，新技术的不断发展和工厂自动化体系不断完善，如仅仅依靠计算机来处理所有的任务就显得成本有些太高，当然也不能满足功耗低的和软硬件可裁剪的要求。所以以应用为中心、以计算机技术为基础、软件硬件可裁剪、适应应用系统对功能、可靠性、成本、体积、功耗严格要求的专用计算机系统，即嵌入式系统应运而生。这就为工厂自动化提供了良好的技术条件和基础。为了充分突出嵌入式系统的优势，在嵌入式系统上移植操作系统显得很重要了，本文就是将μC/OS-II移植到ARM7上从而实现在嵌入式系统上实现对ARM7任务的调度，从而实现任务的并发执行，提高各个任务的工作效率。 因本文主要针对μC/OS-II移植到ARM系统平台这一部分进行展开的，所以下面的内容主要是围绕以下几个部分对μC/OS-II的移植进行阐述： 1 论述操作系统下的编程的好处及μC/OS-II 移植到我们所做课题上的优势。2. uC/OS-II操作系统的核心介绍 3. 本课题需要了解ARM体系架构知识。4. 详细介了μC/OS-II在ARM上的移植过程。5. 简单介绍了操作系统移植后的测试步骤和方法。6. 最后对整个毕业设计作了一些总结并对进课题不足及进一步的研究提出展望。 关键词：嵌入式系统，自动化，μC/OS-II，ARM，移植 THE μC/OS-II OF TRANSPLANTATION FOR ARM ABSTRACT With advances in technology, the continuous development of new technologies and factory automation system has improved constantly, just rely on the computers to handle all of the task makes the expenses become too high, of course, it can not meet the low power consumption and the requirements of hardware and software which can be tailored. Therefore, application-centric, computer technology, software and hardware can be tailored to meet the application system functionality, reliability, cost, size, power consumption, demanding for a special computer system and that is why the embedded system came into being. Its can provide a good technical conditions and foundation for the factorys automation. In order to fully highlight the advantages of embedded systems, the transplant of the embedded operating system in the operating system becomes very important , This article is the μC / OS-II ported to ARM7 which realize the ARM-based embedded systems can achieve the control of cars inner environment comfort level control. Because of this article for μC / OS-II ported to ARM platform to start this part, so the following parts mainly about the transplantation of the μC / OS-II. 1. Discusses the benefits of operating system programming and the advantages of using μC / OS-II ported to the subject which we have done. 2. Discussion of existi