基于stm32湿度与二氧化碳浓度检测.docx

基于stm32湿度与二氧化碳浓度检测系统 摘 要：随着经济的发展，生活水平的提高，人们对居住环境的舒适度要求越来越高，由于经济发展带来的环境污染，使得人们对环境现状越来越关注，对自身的身体健康也越来越看重。由环境污染给健康带来的危害越来越牵动着人们敏感的神经。其中空气中二氧化碳气体的浓度越来越高，导致例如温室效应等诸多问题，因此精确快速检测二氧化碳的浓度，成为一个大家关注的问题。 本课题的研究目的是寻求一个能在各种环境条件下去采集，检测二氧化碳浓度的测量的一个系统。通过在stm32平台上环境的搭建，使用及设计嵌入式产品的设计流程和思想方法，设计并实现二氧化碳浓度测量系统模型，并做出一定的拓展。 通过二氧化碳传感器对二氧化碳浓度进行数据获取，通过stm32开发最小系统与二氧化碳浓度工业传感器，设计一个通过传感器获取二氧化碳浓度的系统。 关键词：二氧化碳传感器；温湿度传感器；STM32C8T6 Humidity and carbon dioxide concentration detection system based on stm32 \o 添加到收藏夹 Abstract:With the development of economy and the improvement of living standards, people have higher and higher requirements for the comfort of living environment. Due to the environmental pollution caused by economic development, people pay more and more attention to the current situation of the environment and their own health. The harm of environmental pollution to health is more and more affecting peoples sensitive nerves. Among them, the concentration of carbon dioxide in the air is getting higher and higher, which leads to many problems, such as the greenhouse effect. Therefore, accurate and rapid detection of carbon dioxide concentration has become a concern. The purpose of this project is to find a system that can collect and detect the concentration of carbon dioxide under various environmental conditions. Through the construction of environment on STM32 platform, using and designing the design process and ideas of embedded products, we design and implement the carbon dioxide concentration measurement system model, and make some expansion. The data of carbon dioxide concentration is acquired by carbon dioxide sensor. The minimum system and industrial sensor of carbon dioxide concentration are developed by STM32. A system of carbon dioxide concentration acquisition by sensor is designed. Key words:Carbon dioxide sensor; temperature and humidity sensor; stm32c8t6 西安航空学院本科毕业设计（论文） PAGE PAGE I 目 录TOC \o 1-3 \h \u 1 绪论 1 1.1 研究背景及目的 1 1.2 研究意义 1 1.3 国内外研究