教学配套课件：汽车实用英语.pptVIP

(i) With the engine idling and valve fully opened, turn the steering wheel to full lock position. Fluid pressure: 7,300 – 7,800 kPa (75 – 80 kgf/cm2 , 1,067 – 1,138 psi) NOTICE: Do not maintain lock position for more than 10 seconds. Do not let the fluid temperature become too high. (j) Disconnect the SST. SST 09640–10010 (09641–01010, 09641–01020, 09641–01030) (k) Connect the pressure feed tube to the PS gear. (l) Bleed the power steering system. 5. Check steering effort (a) Center the steering wheel assy. (b) Remove the horn button assy. (c) Start the engine and run it at idl