约克微电脑控制培训.pptVIP

WARNING-SLIDE VALE UNCALIBRATED 警告-滑阀未标定 STARTER-LOW SUPPLY LING VOLTAGE 启动器-线电压低 STARTER- HIGH SUPPLY LINE VOLTAGE 启动器-线电压高 LCSSS INITIALIZATION FAILED LCSSS初始化失败 第六十三页，共六十七页。 LCSSS-SERIAL COMMUNICATIONS LCSSS-通讯口串行 LCSSS-SHUTDOWN-REQUESTING FAULT DATA LCSSS-停车-需要故障数据 LCSSS-STOP CONTACTS OPEN LCSSS-停车触点断开 LCSSS-LOW PHASE (X) TEMPERATUERE SENSOR LCSSS-相(X)探头低温 第六十四页，共六十七页。 OIL- HIGH TEMPERATURE 油-高油温 OIL- LOW DIFFERENTIAL PRESSURE 油-低压差 OIL- LOW DIFFERENTIAL SEAL PRESSURE 油-低轴封油压差 OIL OR CONDENSER TRANSDUCER 油或冷凝器探头故障 第六十五页，共六十七页。 OIL- CLOGGED FILER 油-过滤器脏堵 OIL SEPERATOR-LOW LEVEL 油分离器-低油位 LCSSS-OPEN SCR LCSSS-SCR断开 LCSSS-PHASE ROTATION LCSSS-反相 第六十六页，共六十七页。 内容总结 约克微电脑控制。? 输入/输出(I/O)板 (制冷剂液位传感器,振动监测)接口。? 变速驱动装置, 固态启动器,机电启动器接口。? 更多输入/输出(I/O)。? 冷冻水出水温度(LCWT)设定范围可调。? 箱体内有多达43个输入/输出口(I/O)。辅助的保护触点 - 触点闭合。排气 - 低排气温度。警告-排气装置-高压。警告-最低负荷-负荷极限。WARNING-OIL-HIGH TEMPERATURE。警告-油-高油温。LCSSS-停车-需要故障数据。LCSSS-反相 第六十七页，共六十七页。 * Notes * * * * * * * The next five screens show how to change a setpoint from the evaporator screen with its associated “pop up” box. * * * * * * This is one of the three types of motor screens: E-M starter, SSS, or VSD. Only the appropriate screen will be displayed on an actual chiller. * This is the alternate SSS “motor” screen. * This is the alternate VSD “motor” screen. This screen also has additional screens to show “VSD Details” (next slide) and “Filter Details” (2 slides). * * * This is the “Setpoints Screen” that allows all of the setpoint values to be entered in one place. It is also the starting screen for all of the chiller “Setup” screens. * The “Setup Screen” shows the configuration of the chiller panel, and provides the access to 6 other “setup” screens. * The “Schedule Screen” allows for the Standard Weekly schedule as well as a 5 week time period for future exceptions. The exceptions are displayed in red to show the dates and times that the chiller will not be runni