重庆市北碚区某区域排水工程设计.docxVIP

2 重庆市北碚区某区域排水工程设计 摘 要 为改善污水处理现状并进行远期长远规划，拟订北碚区建设一座污水处理厂，对其生活污水采取处理，处理之 后的水应满足《城市污水处理标准》(GB18918-2002)一级B级标准的要求，并与当地生活环境相适应。且需与北碚 区生活水准相结合，进而选择合适的废水处理工艺。 本次设计参照该区域设计进水水质，水量和出水情况后选用CASS法作为处理工艺，该工艺流程简单，沉淀效果 好，管理简单，适用于本次设计。 此次毕业设计的主要任务是熟练掌握排水工程的设计内容、原理、方法和步骤，可以依据初始设计的资料准确 且独立的选择设计方案，掌握污水厂的设计流程，各种构筑物的设计方法及其后续污泥处理，熟悉设计计算书以及 设计说明书内容的编写和方法的编制，以及工程图纸的绘制。 关键词： 污水处理 CASS 构筑物 污泥处理 ABSTRACT In order to improve the sewage treatment status and long-term planning of Beibei District, it is planned to build a sewage treatment plant and properly treat the local domestic sewage, so that the sewage can be treated by certain methods to reach GB18918-2002 Pollutants in Urban Sewage Treatment Plants According to the requirements of the first-level standard B in the Discharge Standard, discharge into the Jialing River or reuse it, and select a set of suitable sewage treatment processes in accordance with the local living standards, land resources, and the supply and maintenance of materials and equipment. This design refers to the design of influent water quality, water quantity and effluent conditions in this area, and then selects CASS method as the treatment process. The process is simple, the precipitation effect is good, and the management is simple, which is suitable for this design. The main task of this graduation project is to be able to be familiar with and master the design content, principles, methods and steps of the drainage project, to be able to correctly and independently select the design plan based on the original design data, to master the basic process of the sewage plant design, and the design of various structures. Design method and follow-up sludge treatment, familiar with the preparation content and preparation method of design calculation book and design specification, Keywords:sewage treatment;CASS;structures;sludge 第一篇设计说明书 1.概述 1.1设计依据 and draw engineering drawings. treatment 1.1.1自然概况 北碚区位于四川盆地东部，受受川东南弧形构造带的华蓥山帚状褶皱地质构造控制华蓥山。地形低矮陡峭