PATRAN 17_使用直接法进行频响分析.pdfVIP

Workshop 13-1 Direct Frequency Response Analysis • Workshop Objectives – Perform a frequency response analysis using the Direct Method. • Software Version – Patran 2017.0.2 – MSC Nastran 2017.1 • Files Required – WS13-1_nastran-input.bdf (Nastran Path) – WS13-1_plate-model.bdf (Nastran and Patran Path) 3 Measurements, Displacement Functions and CAD Geometry © 2018 MSC Software Corporation • Problem Description – Using the direct method, determine the frequency response of the flat rectangular plate subjected to a sinusoidal excitation. In this example, the structure is excited by a unit load at a corner of the tip. Use a frequency step of 20 Hz between a range of 20 and 1000 Hz. Use structural damping of g = 0.06. – Below, is a finite element representation of the flat plate. It also contains the loads and boundary constraints. TIP Elements and Grids 1.00 4 Measurements, Displacement Functions and CAD Geometry © 2018 MSC Software Corporation Workshop Steps • Click Here for Nastran Steps – From slide 6 to 18 – Pick up with Patran Step 7 if want to Post Process in Patran. • Click Here for Patran Steps – From slide 19 to 35 5 Measurements, Displacement Functions and CAD Geometry © 2018 MSC Software Corporation Nastran Steps • Nastran Suggested Exercise Steps 1. Open and review the Nastran input file WS13-1_nastran-input.bdf. 2. Add structural damping. 3. Define a frequency step of 20 Hz in the range of 20 to 1000 Hz