PATRAN 08_使用SOL 103对加筋板进行正模态分析.pdfVIP

Workshop 06-1 Normal Modes Analysis for Prestiffened Plate • Workshop Objectives – Perform a normal modes analysis on a plate using SOL 103. – Perform a normal modes analysis on a pre-stiffened plate using SOL 103. – Perform a normal modes analysis on a pre-stiffened plate using SOL 400. – Compare the natural frequencies and mode shapes for these three analyses. • Software Version – Patran 2017.0.2 – MSC Nastran 2017.1 • Files Required – ws06-1_plate_static.bdf (both Nastran and Patran path) 3 Normal Modes Analysis for Prestiffened Plate © 2018 MSC Software Corporation • Problem Description – In this workshop, a 1x1 square aluminum plate under 1000 lb tension loading is used. – The plate FE representation, boundary conditions, and structural parameters are shown below. Table 1: Structural Information Boundary Conditions Table 3A. Length (a) 1 in Height (b) 1 in Thickness 0.01625 in Weight Density 0.101 lbs/in3 Mass/Weight Factor 2.59E-3 sec2/in Elastic Modulus 10.0E6 lbs/in2 Poisson’s Ratio 0.33 4 Normal Modes Analysis for Prestiffened Plate © 2018 MSC Software Corporation Workshop Steps • Click Here for Nastran Steps – From slide 6 to 21 • Click Here for Patran Steps – From slide 22 to 44 5 Normal Modes Analysis for Prestiffened Plate © 2018 MSC Software Corporation Nastran Steps • Nastran Path Suggested Exercise Steps 1. Open and review the WS06-1_plate_static.bdffile. 2. Modify this starting input file to add: