PATRAN 09_加压涡轮叶片的模态分析.pdfVIP

Workshop 06-2 Modal Analysis of Prestiffened Turbine Blade 5,000 rpm y x Fixed edge displacements z • Workshop Objectives – Know how to use the STATSUB Case Control Parameter for 2 Load Cases. – Perform a normal modes analysis on a pre-stiffened model using SOL 103. – Compare the natural frequencies from both Load Cases. • Software Version – Patran 2017.0.2 – MSC Nastran 2017.1 • Files Required – ws06-2_turbine-blade_static.bdf (both Nastran and Patran path) 3 Modal Analysis of Prestiffened Turbine Blade © 2018 MSC Software Corporation • Problem Description – Perform a modal analysis of jet engine turbine blade when it is operating at 5,000 rpm and 50,000 rpm, using SOL 103. A previous static analysis at 5,000 rpm was performed, and the corresponding MSC Nastran .bdf file is provided. 5,000 rpm yy xx Fixed edge displacements zz 4 Modal Analysis of Prestiffened Turbine Blade © 2018 MSC Software Corporation Workshop Steps • Click Here for Nastran Steps – From slide 6 to 13 • Click Here for Patran Steps – From slide 14 to 29 5 Modal Analysis of Prestiffened Turbine Blade © 2018 MSC Software Corporation Nastran Steps • Nastran Path Suggested Exercise Steps 1. Open and review the WS06-2_turbine-blade_static.bdf file. • Notice the model uses Weight Density • Notice there is already a 5000 RPM loading 2. Mo