PATRAN 19_电路板的频响分析.pdfVIP

Workshop 13-3 Frequency Response Analysis of a Circuit Board • Workshop Objectives – Learn how to set up and perform a frequency response analysis. – Find the frequency at which the maximum amplification occurs to verify the results. • Software Version – Patran 2017.0.2 – MSC Nastran 2017.1 • Files Required – WS13-3_nastran-input.bdf (Nastran Path) – WS13-3_pcb-model.bdf (Nastran and Patran Path) • Problem Description – The PCB FEM model will be used for this workshop. After adding right and left pressure loads (see diagram on next page) to the circuit board, you will set up and perform a frequency response analysis on the model and verify the results. 3 Frequency Response Analysis of a Circuit Board © 2018 MSC Software Corporation • Problem Description (Cont.) Front View Isometric View Left pressure load Right pressure load Grid 1000, for data recovery Bottom View 4 Frequency Response Analysis of a Circuit Board © 2018 MSC Software Corporation Workshop Steps • Click Here for Nastran Steps – From slide 6 to 18 – Pick up with Patran Step 7 if want to Post Process in Patran • Click Here for Patran Steps – From slide 19 to 41 5 Frequency Response Analysis of a Circuit Board © 2018 MSC Software Corporation Nastran Steps • Nastran Suggested Exercise Steps 1. Open and review the Nastran input file WS13-3_nastran-input.bdf. 2. Modify the input file to use