手机外壳注塑模设计.pdfVIP

摘要 手机塑料外壳是通过注塑成型生产的，注塑模具的加工是关键。本文 讨论了手机外壳的结构和工艺过程。讨论了塑料模具的设计和分析过程。 分析了注塑模结构的设计过程。热流系统用于提高塑料零件的表面质量和 成形效率。进行了注塑机的实际操作，改变了流量、压力、温度等参数， 并进行了注塑机的实际操作。对成品进行了拍摄，并进行了分析。 塑料是一种快速发展的新型工程材料，塑料的加工和成型技术越来越 重要。注塑成型是塑料件最常用的成型方法。手机外壳注塑模具已成为注 塑模具制造业中最复杂的模具之一。这是手机结构件制造中的一个难点。 因此，研究手机外壳注塑模的设计制造具有很高的实用价值。手机外壳的 外观非常高，整机体积小，结构复杂，需要非常高的注塑成型工艺。手机 外壳注射模设计和制造的主要难点是浇注系统和顶出机构。本课题来源于 企业的实际生产情况。它是基于大量手机外壳注塑模具的设计与制造。文 中还介绍了如何提高模具质量，保证塑料制品成型要求，并列举了塑料制 品在实际生产中可能出现的缺陷及解决办法。 关键词：注射模；模具设计制造；脱模机构；手机外壳成型 1 ABSTRACT The plastic shell of mobile phone is produced by injection molding, and the processing of injection mold is the key. In this paper, the process of the structure and process of the cell phone shell is discussed. The design and analysis process of plastic mould is discussed. The design process of the structure of the injection mold is analyzed. The heat flow system is used to improve the surface quality and the forming efficiency of the plastic parts. The actual operation of the injection molding machine is made, and the parameters of the flow, pressure and temperature are changed, and the actual operation of the injection molding machine is made. The finished product was shot, and the analysis was carried out.Plastic is a new type of engineering material with rapid development, and the processing and molding technology of plastics are becoming more and more important. Injection molding is the most common molding method for plastic parts. The injection mold of mobile phone shell has become one of the most complex molds in the injection mold manufacturing industry. It is a difficult point in the manufacture of mobile phone structural parts. Therefore, studying the design and manufacture of injection mold for mob