SAE AMS2750F-2020(R) 高温测量法 Pyrometry 高温测量法.pdf

AEROSPACE A MS2750 ™ REV .F INTERNATIONALo MATERIAL SPECIFICATION Issued 1980-04 Revised 2020-06 Superseding AMS2750E (R) Py「ometry RATIONALE AMS2750F results from a Five-Year Review and update of the specification . Technical changes have been made that resolve issues that were found in the previous revision. Resolution requirements for recording instruments have been updated to be able to demonstrate that the equipment meets the accuracy tolerances of Table 7 when using the pe『centage instead of the numerical tolerance. AMS2750F is a complete rewrite. Therefore, there are no change bars to indicate specific changes from the last revision . The use of Fahrenheit versus Celsius temperatures and Imperial versus SI measurement units has been changed fro m 。F (C) to 。F or ·cand Imperial units (SI units) to Imperial units or SI units to refl ect the requirements for users work ing to Fahrenheit/Imperial units and the requirements for users working to Celsius/S I units. NOTE: Some requirements are precise conversions wh ile others are approximate conversions (see 8.2). 1. SCOPE 1.1 This specificat ion covers pyrometric requ irements for equipment used for the thermal processing of metallic materials. Spec1白cally, it covers temperature sensors, i nst阳mentati on, thermal processing equipment , correction factors and instrument