基于ANSYS的电磁感应加热系统仿真与实验.pdfVIP

百学须先立志。——朱熹 ISSN 1002-4956 实 验 技 术 与 管 理 第 38 卷 第 5 期 2021 年5 月 CN11-2034/T Experimental Technology and Management Vol.38 No.5 May 2021 DOI: 10.16791/j.cnki.sjg.2021.05.026 虚拟仿真技术 基于ANSYS 的电磁感应加热系统仿真与实验 房紫璐，龚 直，李玉玲，姚缨英 （浙江大学电气工程学院，浙江 杭州 310027 ） 摘 要：将电子工程专业基础课“工程电磁场”中的电磁感应定律和涡流理论与实际应用相结合，提出了基于电磁 炉加热系统的仿真实验方案。方案采用 ANSYS 有限元仿真软件对电磁感应加热系统进行建模仿真，并分析典型系 统参数对加热系统耦合的影响。计算得到的涡流矢量图与欧姆损耗密度云图能够帮助学生更好地理解感应加热原理。 实验方案将理论分析、数值仿真和实验测量三者相结合，能够帮助学生更好地构建该课程系统全面的思维框架。 关键词：电磁感应；涡流；感应加热；工程电磁场 中图分类号：TM154 文献标识码：A 文章编号：1002-4956(2021)05-0129-05 Simulation and experiment of electromagnetic induction heating system based on ANSYS FANG Zilu, GONG Zhi, LI Yuling, YAO Yingying (Department of Electrical Engineering, Zhejiang University, Hangzhou 310027, China) Abstract: “Engineering electromagnetics” is a professional basic course in electrical engineering. In this paper, a simulation and experimental scheme based on an induction cooker heating system is proposed to study the electromagnetic induction law and the eddy current phenomenon. The induction heating system is modeled and simulated by the finite element simulation package ANSYS. The effects of different structure parameters on the coupling of the heating system are analyzed. The simulated eddy current and ohmic loss are plotted to further help students understand the principles of induction heating. The experiment scheme integrates theoretical analysis, numerical simulation, and experimental measurements, which help