中国轴承标准汇编.docVIP

中国轴承标准汇编 GB/T 271-1997 滚动轴承 分类 GB/T 272-1993 滚动轴承 代号方法 GB/T 273.1-1987 滚动轴承 圆锥滚子轴承 外形尺寸总方案 GB/T 273.2-1998 滚动轴承 推力轴承 外形尺寸总方案 GB/T 273.3-1999 滚动轴承 向心轴承 外形尺寸总方案 GB/T 274-2000 滚动轴承 倒角尺寸最大值 GB/T 275-1993 滚动轴承与轴和外壳的配合 GB/T 276-1994 滚动轴承 深沟球轴承 外形尺寸 GB/T 281-1994 滚动轴承 调心球轴承 外形尺寸 GB/T 283-1994 滚动轴承 圆柱滚子轴承 外形尺寸 GB/T 285-1994 滚动轴承 双列圆柱滚子轴承接 外形尺寸 GB/T 288-1994 滚动轴承 调心滚子轴承 外形尺寸 GB/T 290-1998 滚动轴承 冲压外圈滚针轴承 外形尺寸 GB/T 292-1994 滚动轴承 角接触球轴承 外形尺寸 GB/T 294-1994 滚动轴承 三点和四点接触球轴承 外形尺寸 GB/T 296-1994 滚动轴承 双列角接触球轴承 外形尺寸 GB/T 297-1994 滚动轴承 圆锥滚子轴承 外形尺寸 GB/T 299-1995 滚动轴承 双列圆锥滚子轴承 外形尺寸 GB/T 300-1995 滚动轴承 四列圆锥滚子轴承 外形尺寸 GB/T 301-1995 滚动轴承 推力球轴承 外形尺寸 GB/T 304.1-2002 关节轴承 分类 GB/T 304.2-2002 关节轴承 代号方法 n the main terminal, and the telephone Office is responsible for providing the appropriate size adapter patch panels and electrical protection unit. (Shuttle bus) wiring (IDF) set up in the workshop on the second floor of the building, located in the District of weak electrical cabinets (well). Engine room placed inside the Cabinet, IDF placed a standard 40U cabinets for installation of network and wiring devices, management computer and telephone information. Cabinet distribution frame are made of Super five RJ45 patch panel horizontal twisted pair connections. Computer information management, admin area using the jumpers, which uses private RJ45-RJ45 soft jumpers for network devices with jumpers hopping between all switches, changes, expansion and maintenance were done quickly in the wiring closet. Twisted length Centre room is located on the second floor, outward radiation of each line (except some points may exceed) does not exceed 100 metres in length, all information for the various floors all rooms (distribution Cabinet) unified management. District workshop building distribution lines (IDF) via fiber optic cables connected to the total room cabinets. Fiber length were: workshops two IDF: total more than 1200 square meters, double the number of strands can be calculated by