限位轴套零件工艺及其夹具设计.docxVIP

毕 业 设 计（论 文） 限位轴套零件工艺及其夹具设计 PAGE 1 PAGE 1 PAGE 1 PAGE 1 限位轴套零件工艺及其夹具设计 摘 要 随着各行制造业的进步与发展，零件设计和加工的质量与精度取决于工艺水平的高低并且对于加工精度影响越来越大，在制造业中机械加工工艺阶段的夹具设计是不可缺少的工艺装备。夹具的质量、工作效率和使用的可靠性、安全性，都对零件的加工质量和生产效率起着决定性的影响。 本文根据车床性能的特点，针对限位轴套零件，进行了工艺方案的分析和确定，刀具及切削用量的选择，确定了加工顺序和加工路线，加工效率，简化了机械加工工序等方面的优势;对限位轴套车Φ52外圆，Φ46内孔的夹具设计，确定合适的定位基准，选择合理的定位元件、夹紧元件等部件,分析夹具的合理性，最后利用三维建模软件对夹具进行装配，并分析其安全性、合理性,以提高零件的加工效率和质量。 关键词:工艺分析；装夹；加工工艺；切削用量 PAGE 1 PAGE 1 PAGE 2 PAGE 2 Technology and fixture design of limit bushing parts Abstract With the progress and development of manufacturing industry, the quality and precision of part design and processing depend on the level of technology and have more and more influence on the accuracy of processing. Fixture is one of the most important process equipment in the manufacturing industry. The quality, efficiency and reliability of fixture have a decisive influence on the machining quality and production efficiency of parts. According to the characteristics of lathe, this paper analyzes the process plan, the determination of tooling plan, the selection of cutting tools and cutting parameters, the determination of machining sequence and route, machining efficiency, and the simplification of working procedure; In order to improve the machining efficiency and quality of the parts, it is necessary to design the fixture for the limit shaft turning Φ52 outer circle and Φ46 inner hole, determine the appropriate positioning benchmark, select the positioning elements, clamping elements and other components, analyze the rationality of the fixture, and finally assemble the fixture with the 3D modeling software, and analyze its safety and rationality. Key words: process analysis； The clamping. Processing technology； Cutting paramete PAGE 1 PAGE 1 目录 TOC \o 1-3 \h \u 30780 摘 要 I 17875 Abstract II 20308 1 绪论 1 4275 1.1 概述 1 21734 1.2 研究意义及现状 1 18827 1.3 主要研究内容 2 22865 2 零件分析 3 3210 2.1 零件的作用 3 2095 2.2 零件的工艺性审查 3 24190 2.3