文本分析案例1.pdfVIP

WWoorrkksshhoopp1100 CCoonnttaaccttAAnnaallyyssiissttooGGeenneerraattee FFoorrccee--ddeefflleeccttiioonnooffaaSSpprriinngg • WWoorrkksshhoopp OObbjjeeccttiivveess – Create deformable and rigid contact bodies. – Create glued and touched contact options in contact table. – Compress the spring with the two rigid bodies and create force deflection curve. – Compare results of two different element types, tetra4 and tetra 0. • SSooffttwwaarree VVeerrssiioonn – Marc and Mentat 20 3 • RReeqquuiirreedd FFiilleess – spring2a.xmt_txt – surf_ .txt • PPrroobblleemm DDeessccrriippttiioonn – A deformable aluminum spring sits on one rigid body surface and is compressed by another rigid body surface that sits on top of it. To compress the spring the top surface moves down by 7 inches. The initial run will be using a spring that is meshed with element type tetra4, a second ob will be run with tetra10 elements for comparison. Aluminum Spring Top surface compressed 7 inches. • SSuuggggeesstteedd SStteeppss:: 1. Set current working directory to C:\Training. 2. Import the model spring2a.xmt_txt as eneral CAD Parasolid. 3. Modify the plot for better illustration. 4. Create a TriMesh over the surface of the spring with element size equal to 1.0. 5. Create Tet Mesh of the volume enclosed by the surface elementswith coarsening factor equal to 1.5. 6. Create material properties for Aluminum. • YoungModulus:10e6 psi • PoissonsRatio:0.3 7. Use the p