CDMA反向业务信道仿真重庆邮电大学毕业设计.docVIP

编 号： 审定成绩： 重庆邮电大学 毕业设计（论文） 设计（论文）题目： 学院： 学 生 姓 名 ： 专 业 ： 班 级 ： 学 号 ： 指 导 教 师 ： 答辩组 负责人 ： 填表时间：年月 重庆邮电大学教务处制【】ABSTRACT CDMA (Code Division Multiple Access) is a technology developed on the basis of digital communication technology branch of the spread spectrum communication. It is used primarily assigned to different users modulated signals orthogonal to each other (or as much as possible orthogonal) encoding, multiple users simultaneously access systems and networks using the same frequency communication. Modulated signals orthogonal to each other (or as much as possible orthogonal) encoding, the original signal spectrum bandwidth expansion, the so-called spread spectrum. Based on windows7 platform, after the introduction of CDMA and MATLAB communication simulation content, using MATLAB, Simulink communication module library for modeling, simulation of the CDMA reverse traffic channel by the powerful numerical computing power of MATLAB. By changing the original seed, simulation, and signal to noise ratio of three ways, and thus the results obtained from the results of analysis of the influence of various parameters on the simulation results. Final intuitive simulation waveforms, and then start from the simulation waveforms, a more intuitive description of the working principle of the simulation module to provide important reference data to establish the actual communication channel, and thus the simulation waveforms are also mobile communication channel design and improve on the high value. 【Key words】 CDMA Simulation Simulink Reverse traffic channel 第一章 绪论 1 1.1 CDMA的发展状况及其技术特点 1 1.1.1 CDMA发展状况 1 1.1.2 CDMA的技术特点 1 1.2 IS-95标准 3 1.2.1 IS-95系统特性 4 1.2.2 IS-95A IS-95B 5 1.3 通信系统仿真概述 5 1.3.1通信系统仿真的概念 5 1.3.2 通信系统仿真的重要作用 6 1.3.3 通信系统仿真问题的提出 6 1.3.4 通信系统仿真问题的研究价值 7 1.3.5 通信系统仿真问题的研究现状 7 1.4 本论文的主要研究内容及意义 8 1.5 本章小节 8