伪彩色增强显示的设计与实现.pdfVIP

中国体视学与图像分析 2003 年 12 月 第8 卷 第4 期 CHINESE JOURNAL OF STEREOLOGY AND IMAGE ANALYSIS Vol.8 No.4 Dec.2003 235 文章编号：1007-1482(2003)04-05 伪彩色增强显示的设计与实现 李文元，黄翔东，李昌禄，袁亚斌，王兆华 （天津大学电子信息工程学院，天津，300072） 【摘要】 目的：本文研究适用于多种伪彩色算法的硬件电路设计，以实现将亮度信号转化成伪 彩色信号输出。方法：采用灰度分割算法，根据不同灰度阈值来配置其灰度对应的颜色，并且设 计实现了一套包括视频处理芯片 SAA7111,复杂可编程逻辑器件 EPM7256,视频编码芯片 SAA7185 及其单片机2051构造的伪彩色处理系统。结果:通过建立不同阈值的颜色查找表，编写VHDL程 序，可以实现不同伪彩色增强显示的效果。结论：采用灰度分割算法，并且结合本设计的硬件电 路，可以成功地完成适用于各种场合的伪彩色处理。 【关键词】伪彩色；灰度分割；可编程逻辑器件；阈值 【中图分类号】TN941.1 【文献标识码】 A DESIGN AND IMPLEMENTATION FOR THE PSEUDO-COLOR ENHANCEMENT DISPLAY LI Wen-yuan,HUANG Xiang-dong, LI Chang-lu, YUAN Ya-bin ,WANG Zhao-hua (Electronics Information Engineering College, Tianjin University, Tianjin ,300072) 【ABSTRACT 】Objective: This paper focuses on studying the hardware circuit design that can serve different algorithms to reach the goal of transforming the intensity signal into pseudo-color output signal. Methodology: With the intensity slicing algorithm, the color corresponding to the intensity is configured based on the different intensity thresholds. Moreover, a pseudo-color processing system is implemented containing the video processor SAA7111,CPLD EPM7256, video encoder SAA7185 and MCU 2051. Results : With the color look-up table corresponding to the different threshold is constructed , programming the VHDL procedure can lead to the different pseudo-color enhancement different effects. Conclusion: Combining the intensity slicing algorithm and the hardware circuit presented here, the pseudo-color processing ,which is adaptable to varieties of circumstances, can be successfully realized. 【KEYWORDS 】pseudo-color