遥控器外壳上部分塑料模具设计说明书（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 本模具设计过程中分析了DVD遥控器外壳上部分塑料模具设计的工艺特性，并介绍了PS材料的成型工艺特点。在模具结构设计过程中详细地分析了模具结构与计算，其中模具结构的设计既是重点又是难点，主要包括成型位置的及分型面的选择，模具型腔数的确定及型腔的排列和流道布局和浇口位置的选择，模具工作零件的结构设计，侧面分型及抽芯机构的设计，推出机构的设计，拉料杆的形式选择，排气方式设计等。最后还对模具的成型零件进行了加工工艺的分析和设备的校核，还说明了模具的工作原理，并且绘制出模具的总装图和非标准零件工作图。 本设计方案结构紧凑，满足制品大批量生产、高精度、外形复杂的要求，设计参考了以往注射模具的设计经验，并结合制件性能，简化设计机构，并且运用AutoCAD、ProE等软件进行二维和三维绘图，实现短的生产周期和良好的经济性能。 关键词：DVD遥控器外壳上部分塑料模具设计；塑料注射模；装配 Abstract This molding tool designed to analyze the craft characteristic of losing the liquid pump conjunction head in the process, and introduced PS modeling of material craft characteristics,Put forward the project that the dissimilarity models in the molding tool structure design process and carry on than, Die structure which is the focus of the design is difficult, including the location and the molding surface of choice, to determine the number of mold cavity and the cavity flow arrangement and the layout and the choice of gate location, mold parts of the structure of work design, the side core pulling type and design of institutions, the introduction of the design of institutions, under the form of drawing materials selection, design, such as exhaust.Adopted most modeling of Zhui project.In the meantime, in detail analyzed molding tool structure and calculation.The end still modeled spare parts to carry on to process the analysis of the craft and pit in the school of the equipments to the molding tool.Also explained the work principle of molding tool, and drew always packing of a molding tool diagram and not- standard spare parts work diagram. This structure of design plan is compactness. Meet products producing in enormous quantities, demand with complicated high accuracy and appearance. Have designed and consulted the design experience that injected the mould in the past. Combine and make a performance. Simplify the design institute. And use such software as AutoCAD , Pro-E ,etc. to carry on the two-dimensional or three-dimensional drawing .Realize