IEC EN60065 测试表格教程.doc

Laboratory Measurements ?? NS Technology Co., Ltd. Project Engineer Client Lab Engineer Appliance Requested Date Model No. Re-test Standard IEC 60065:2001/EN 60065:2002/ UL/C 60065:2003 GB8898 Full-test (LVD) Report No. NSS- Modification Construction check Add Test after review Lab Measurements return to Engineer directly (If no tick, put into default tray) Lab Use Only Lab Start Date / /2008 Lab Finish Date / /2008 Remarks: This lab measurement report is for general office equipment. Unless otherwise specified, all values mentioned in this lab report are in r.m.s. value. Summary of Testing: * Clause(s) Test(s) Result Remark 5 Durability of Marking Test P / F 5.1 Input Current Test P / F 6.1 Ionizing radiation Sub-contracted 6.2 Laser radiation Sub-contracted 7 Heating under Normal Operations P / F 7.2 Softening Test for insulation material Sub-contracted If current 0,2A 8.3 Humidity Test for hygroscopic Materials P / F 8.13 20N test for windows, lenses, etc. P / F 8.14 50N test for covers P / F 9.1.1.1 Touch current and PE current P / F 9.1.6 Discharge Test of Mains Plug P / F 9.1.7 Resistance to external Forces (50N or 250N) P / F 10.1 Surge Test P / F 10.2 Humidity Test P / F 10.3 Insulation Resistance and electric Strength P / F 11.1 Touch current under Fault Conditions P / F 11.2 Heating under Fault Conditions P / F 12.1.1 Bump Test P / F 12.1.2 Vibration Test Sub-contracted 12.1.3 Impact Test P / F 12.1.4 Drop Test P / F 12.1.5 Stress Relief Test P / F 12.2 Fixing of actuating Elements P / F 12.3 Remote control devices P / F 12.4 Drawers P / F 12.5 Antenna coaxial Sockets P / F 12.6.1 Physical Securement of Antenna P / F 13.2 Working Voltages P / F 15.2 Ground Continuity Test P / F 15.4 Devices forming a part of the Mains Plug Torque Test P / F 15.4.3 Mains Plug Drop and Pin Test P / F 16.5 Non-detachable Flexi