数控电源模块化设计.docVIP

数控电源的模块化设计 Modular Design of Digital Power Supply 谢健华，任毅，李文峰，张欣龙，袁臣虎Yuan Chenhu School of Information and Communication Engineering, Tianjin Polytechnic University(300160, Tianjing) 摘要：本文采用凌阳16位单片机SPCE061A完成了数控电源的模块化设计，实现了电源输出电压的设定、输出电压数控电源由部分部分组成。KA3525芯片为核心的半桥功率变换器、整流滤波电路、稳压电路、滤波电路等组成。数控部分采用PWM波的产生。采用4×4的矩阵键盘实现输出电压设定和步进调整，采用A/D和D/A转换技术对输出电压进行设定和采样，采用RT12864液晶显示器对电源输出电压、输出电流和相关控制以及状态信息进行显示。 关键词：数控电源 模块化 凌阳单片机 RT12864液晶显示 Abstract: The paper adopts the Sunplus 16-bit single chip processor SPCE061A to complete the modular design of digital power supply, and to realize funcions such as the setting of out-put voltage, the output voltage step adjustment, the display of output voltage and output current and the proctecion of input under-voltage, etc.. The digital power supply designed includes analog part and digital part.The analog part is composed of half-bridge power converter with the chip KA3525 as its core, rectifier-filter circuit, voltage-stabilizing circuit, and filter circuit, etc.. The digital part adopts the 16-bit single chip processor SPCE061A to realize the PWM wave which is from input to the half-bridge unipolar inverter circuit. The application of 4*4 matrix keyboard results in the setting of output voltage and step adjustment; the use of A/D and D/A converting technology leads to the setting and sampling of output voltage; the application of RT12864 LCD shows output voltage, output current, related control and other information. Keywords: Digital power supply, Modulization, Sunplus single chip microcomputer, RT12864, RT12864 LCD ［中图分类号］TN86 ［文献标识码］ A 文章编号：1561-0349（2010）11- 1 前言 在生活和实验中用到的电源但是普遍存在问题，操作难度大磨损老化。针对问题，本文采用KA3525控制芯片凌阳作为核心，实现了基于单片机的数控电源框图如图所示电路原理如图所示图电源原理图整流滤波电路、EMI滤波电路、功率变换电路、驱动电路、输出电路、稳压电路、辅助电源电路以及过流保护电路等整流滤波电路如图所示桥式整流。电容C、C1用于滤除整流后的高频成分低频成分。 图? 整流滤波电路 电路如图所示。该两个输入输出端一个接地端。F1快速保险丝， L1、L2是共模电感， C1、C、C、C滤波电容。L1-1、L1-2对差模干扰不起作用，对共模信号大的感抗C11、C、用抑制差模干扰C13、C分压接地抑制共模干扰。????????? 图 EMI滤波电路 图5 功率变换电路 符号改为斜体，脚注为小写正体 3.1.4 电源的驱动电路