非理想DC-DC变换器建模研究.pdfVIP

非理想DC-DC 变换器建模研究 陈亚爱 张卫平 周京华 北方工业大学 电力电子与电气传动北京市高等学校工程研究中心，北京 100144 Email ：cya@ncut.edu.cn 摘要：论文基于Buck 变换器，在考虑开关器件导通损耗和寄生参数的条件下研究非理想变换器的建模问题，根据能量守恒 原理，用三端开关器件模型，推导了非理想Buck 变换器控制-输出的精确模型。仿真和样机实验表明，用所建非理想Buck 变换器模型仿真得到的特性和实际电路测得的特性吻合，验证了所建模型的正确。该模型直观，物理意义清晰，对大功率开 关变换器具有参考价值，为进一步优化开关电源的性能和提高设计效率提供了一种新思路。 关键词：非理想变换器，建模，寄生参数，精确模型，连续导电模式 Modeling research of the non-ideal DC-DC converter Chen Yaai Zhang Weiping Zhou jinghua North China University of Technology, Beijing Higher Institution Engineering Research Center of Power Electronics and Motor Drives, Beijing 100144,China Email ：cya@ncut.edu.cn Abstract : Based on buck converter, this paper researches the modeling problem of non-ideal converter in conditions of considering switching conduction losses and parasitic parameters, derives a control - output accurate model of the non-ideal Buck converter with a three-terminal switching device model according to the energy conservation principle. Simulation and prototype experiments show that the characteristics of the non-ideal Buck converter model achieved by simulation just match the actual measured characteristics of the circuit. This model has clear physical meanings and is useful for the high power switching converters. It is also provides a new idea for optimizing the performance of the switching power supply and improving designing efficiency. Key Words : non-ideal converter, modeling, parasitic parameters, accurate model，Continuous conductive mode 1．引言 ˆ U G u(s) g d 0