电力变压器油纸绝缘系统局部放电过程研究的论文.pdfVIP

高电压与绝缘技术 ·1273 · 电力变压器油纸绝缘系统局部放电过程研究 1严家明 廖瑞金 重庆大学输变电装备及系统安全与新技术国家重点实验室 重庆 400044 【摘 要】 局部放电是电气设备中重要的电气现象，也是绝缘损伤 的主要原因之一。试验了针板、柱 板和球板电极结构下油纸绝缘系统的局部放电，随着电压的升高，在三种电极结构下局部 放电的发生发展过程几乎相同；出现沿面放 电后，绝缘纸板上出现放电痕迹，形成电树 枝；树枝的形成以及穿孔性损伤的发展，不仅和局部放电量大小有关，还与电场的切向和 法向分量有关；优化电场结构是预防局部放电的有效措施。 【关键词】 局部放电 油纸绝缘 电树枝 Analysis on Partial Discharge Process of Oil-pressboard Insulation System in Transformers Yan Jiaming Liao Ruijin The State Key Laboratory of Power Transmission Equipment System Security and New Technology ， College of Electrical Engineering ，Chongqing University ，Chongqing 400044 ，China Abstract ：Partial discharge is a important electrical phenomenon in the high voltage equipments ，and it can damage the insulation materials. The oil-pressboard partial discharge experimentations are carried out in the needle-plate cylinder-plate and sphere-plate electrode systems ，the discharge stages in each electrode system are almost the same when the applied voltages are increased ；after surface discharge occurring ，discharge traces appear on the pressboard and then electrical trees are formed which are similar to the leaf ；the forming of the electrical trees on the insulation paper and the damage degree to the insulation paper may be concerned not only with discharge quantities ，but also with the tangential and normal components of electric field strength ； an effective measure is to Optimizing the insulation structures of the electric field for avoiding the discharge. Key words ：Partial discharge ；Oil-pressboard insulation ；Elect