基于“产学合作、项目驱动”模式的工程训练中心构建-以宁波工程学院电子与控制工程训练中心建设为例.pdfVIP

基于“产学合作、项目驱动”模式的工程训练中心构建 — 以宁波工程学院电子与控制工程训练中心建设为例 楼建明，廖远江，孙剑鸣，傅越千 宁波工程学院 ，浙江 宁波 315016 E-mail: ljm842@163.com 摘 要:该文以宁波工程学院电子与控制工程训练中心建设实践为例，阐述了基于“产学合作、项目驱动” 的工程训练 中心建设指导思想、建设目标、建设方案与建设成效。实践证明，“产学合作、项目驱动”是工程训练中心行之有效 的建设模式，为培养卓越工程师创造了良好的工程训练环境。 关键词: 产学合作, 项目驱动, 工程训练中心 Construction Of Engineering Environment Based On The Mode Of Industry-University Cooperation And Project-driving—An Example Of Electronic And Control Engineering Training Center Construction Lou Jianming, Liao YuanJiang, Sun Jianming, Fu Yueqian Ningbo University of Technonlogy, Ningbo 315016, China E-mail: ljm842@163.com Abstract: Taking the construction practice of technology electronic and control engineering training center in Ningbo University of Technonlogy as an example, this paper describes the guiding idea ，construction goal, construction scheme and construction achievements of engineering training center based on the industry-university cooperation, project driving. Practice has proved that industry-university cooperation, project driving is a successful mode in engineering training center construction. Key Words: Indust