基于控制理论热轧工艺优化设计.pdfVIP

基于控制理论的热轧工艺优化设计 ·1 · 基于控制理论的热轧工艺优化设计 1 2 解 飞 殷丽南 (1. 鞍钢股份有限公司炼钢总厂, 鞍山 114021; 2. 鞍钢股份有限公司热轧带钢厂, 鞍山 114021) 摘 要 热轧板带热机械控制过程工艺的制定是一项耗时耗力的研究工作。与此同时，由于热轧过程组织演变的复 杂性和实际轧制生产中的各种约束条件，传统的TMCP 工艺开发方法只能给出较好而并非最优的工艺制度。因此， 开发出以产品力学性能为目标优化热轧工艺的新方法是非常有必要的。它的基本概念为建立钢材热轧过程组织演变 与性能预测模型，以热轧生产线的设备能力为约束条件，优化计算工艺参数从而达到预设的力学性能目标。在论文 的研究中，通过贝叶斯神经网络在热轧组织性能预测中的应用和对Q345 钢板的分析，为热轧工艺优化设计提供了 高精度的模型基础。 关键词 热机械控制过程 工艺优化 贝叶斯神经网络 Q345 钢板 Optimal Design of Hot Rolling Process Based on Control Theory 1 2 Xie Fei Yin Linan (1.Steel Plant in Angang Steel Co.,Ltd., Anshan, 114021; 2. Hot Strip Mill of Angang Steel Co.,Ltd., Anshan, 114021) Abstract The design of TMCP (Thermal Mechanical Controlled Processing) parameters for hot rolled plate/strip is a time-consuming and exhausting research work. At the same time, because of the complexity of microstrual evolution and constraints of equipments in hot rolling process, it is difficult to determine the optimal TMCP parameters in traditional way. Therefore development of new ways, which is to optimize the hot rolling process with the mechanical properties set up as the target, is of great necessity. The mechanical model for description of microstructure evolution and mechanical properties prediction, and process optimization under the constraints of equipments to achieve the required mechanical properties constitute the basic concept of optimal design of hot rolling process. In the pre