毕业设计（论文）-基于SystemView平台的通信原理实验设计.doc

基于SystemView平台的通信原理实验设计 摘 要 通信原理课程的主要特点是理论性强、直观性差。将仿真软件运用到通信原理学习中，可简化复杂的分析过程，可对各类通信系统进行定量分析，通过改变信道参数或技术方法来观察对通信系统性能指标的影响，并能把分析结果以图形的方式（时域和频域）显示出来，加深学生对原理的理解，从而可以获得比较好的学习效果。 目前比较常用的仿真工具有SystemView、 MATLAB和Multsim等，它们既自成体系，各有其特点，又相辅相成。本文借助SystemView仿真软件平台，对通信原理课程知识体系中的主要知识点进行了建模与仿真，力求做到丰富的实验项目、简单的实验步骤、明了的实验模型，其目的是充分利用该仿真平台，理解基本原理和概念。基于此，完成了如下实验的设计。（1）模拟调制系统：常规双边带调幅AM与双边带信号在MATLAB和Multisim环境下仿真同一种通信系统与SystemView进行比较并分析各软件的特点。 The Experimental Design of Communication System Based on Systemiew Platform ABSTRACT The main features of Communication Principles are difficult to understand. Applying the Simulation software to the study in Communication Principles can simplify the process of calculation and showing the calculation results in the form of map images, at the same time simulation software can simulate a lot Communication Systems. To observe the performance of communications systems by changing some parameters can enhance students’ understanding can also get better teaching results. SystemView，MATLAB and Multisim are the often-used simulation tools now, they do not only have their own characteristics, but also can complement with each other. In this study，we are strive to achieve simple procedures and rich experiments with SystemView platform. Therefore, he following several trials are designed. (1) Modulation and demodulation of AM and DSB-SC modulation. (2) Modulation and demodulation of Digital baseband signal. Proving the basic principles of modulation by 2ASK、2FSK and QAM modulation process. igital signal: Eye pattern. (4) PCM codec. This study describes the principles of PCM and the formation of the baseband signal process of PCM coding. (5) The Digital modulation and demodulation in modern Communication: DS-SS. In addition, the same communication system is simulated in Matlab and Multisim，compare and analyze the characteristics and advantages of these software. KEY WORDS: communication systems, simulation, SystemView 目 录 摘 要 I ABSTRACT II 1 绪论 1 1.1 研究背