Docol1200M超高强钢板温成形性能研究.pdfVIP

新技术新材料 第十三届中国机械工程学会塑性工程分会年会 Docol 1200M超高强钢板温成形性能研究 龙军峰赵阳邓明 (重庆理工大学重庆40054) 摘要：高强钢板的温成形可显著改善高强钢的成形性能。文章以Docoll200M超高强度钢板为对象， 研究了高强钢在不同温度下的温成形性能，并对其相应的断口面进行了分析。结果表明：Docoll200M 超高强度钢板的拉胀成形性能总体随温度的升高而升高，但在200℃和300℃时，材料受到了第一类 回火脆性和蓝脆的影响其成形性能突然降低：这种高强钢板适合的温成形温度为4009C。以上研究 为该类高强钢板的温成形工艺打下了基础。 关键词：超高强钢；温成形；成形性能 Researchonthewarm ofDocoll200Multra formingproperty steel highstrength LONG Junfeng，ZHAOYang，DENGMing， (ChongqingUniversityofTechnology,Chongqin9400054 Abstract：Warm can the of steel technology formabilityhighstrengthsignificantly．This forming improve Docoll ultra thewarlTl ofDocoll200M papertargeted200Mhighstrengthsteel，studied formingproperty ultra steelindifferent the fracturesurface．This highstrength temperature，andanalyzedcorresponding resultshows：the ofDocoll200Multra steelwithwarlil and study formingproperty highstrength drawing increasedwith overall．However，its becauseof bulging increasingtemperature formabilitysuddenlydrops thefirstkindof andbluebrittlenessat most brittleness 200。Cand suitable temper 300C；The forming ofthe steel is400。C．ThestudieslaidthefoundationforthewarlIl temperaturehigh—strengthplate forming of steelsheet． technologyhighstrength Keywords：Highstrengthsteel；warlnforming；Formability 1．引言 使用高强钢制造汽车零部件是增加安全性和实现汽车轻量化的