静态流量分析疏浚中.pdfVIP

th The 12 International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG) 1-6 October, 2008 Goa, India Static Liquefaction Analysis using Simplified Modified State Parameter Approach for Dredged Sludge Depot Hollandsch Diep R.R. de Jager, F.A.J.M. Mathijssen Royal Boskalis Westminster nv, Papendrecht/ Delft University of Technology Citg, Delft, the Netherlands F. Molenkamp Delft University of Technology Citg, Delft, the Netherlands A.H. Nooy van der Kolff Royal Boskalis Westminster nv, Papendrecht, the Netherlands Keywords: case history, constitutive modelling, fines, instability, liquefaction, loose sands, static liquefaction, triaxial tests. ABSTRACT: The historical background of liquefaction in the Netherlands and subsequent empirical guidelines are first briefly discussed. The usefulness of this empirical knowledge for Geotechnical Category 3 (GC3) projects is limited, since quantification of risks and insight in the feasibility of projects are limited. During the tender stage and after award of contract of the Design, Construct and Maintenance project for the excavation of the dredged sludge depot in the river Hollandsch Diep in the Netherlands, an elaborate literature study was carried out, resulting in the formulation of a critical state framework. In this framework stress points are analysed using the modified state parameter as representation for the state of the subsoil. The initiation of static liquefaction is analysed in an uncoupled analysis using the slope of the instability line as input for a commercial finite element code. Several planned and unplanned failures during the realisation of the dredging activities were successfully analysed using a simplif