推荐-肥皂盒模具的设计（毕业设计论文）.docVIP

摘 要Abstract In recent years, Chinas household electrical appliance industry in the development of high-speed tooling industry, in particular the plastic mold of the ever-increasing demands. In 2004, the plastic mold industry in the entire Die share has risen to 30% According to the experts predict that in the next few years, China plastic mold industry will continue to maintain an average annual growth rate of 10% over the high rate of development. Domestic market to plastic mold injection mold greatest demand, which focused on the development of engineering plastics die. Plastic injection molding molding is an important method, which is primarily applicable to thermoplastic plastic molding, Molding can be a complex shape of precision plastic parts. Is the topic of small appliances Juicer the drums Cup as a design model, the injection mold-related knowledge as a basis for elaborate plastic injection mold design process. The design of Orange drums Cup for the injection mold design, the use of software UG plastic parts for the solid modeling, Plastic Parts of the structure analysis for the process. Defined the design, determine the injection molding process as well as some specific details of the calculation and verification. The design of such a structure can be used to ensure reliable Die work to ensure that the other parts of the tie. Finally, a set of auto mapping mold parts and assembly plans. The subject of Orange drums Cup injection mold design, and to consolidate and deepen the learning, has been fairly satisfied with the results, achieved the desired design intent Keywords : plastic mold; injection molding; Mold design; 目 录 摘 要 1 Abstract 2 目 录 3 第1章 绪 论 5 第2章 肥皂盒塑料件 7 2.1塑件的原材料分析 7 2.2塑件的结构和尺寸精度及表面质量分析 8 2.2.1塑件的结构分析 8 2.2.2塑件尺寸精度的分析 8 2.2.3表面质量的分析 8 2.3塑件的体积重量 8 2.4塑件的注射工艺参数的确定 9 第3章 注射机的选定 10 3.1注射机的选用 10 3.2注射机的参数校核 10 第4章 塑料注射模具设计 12 4.1分型面的选择 12 4.2 型腔数的确定 12 4.3确定型腔的排列方式 12 4.4模具工作的设计与计算 13 4.5浇注系统 15 4.5.1浇注系统的组成 15 4.5.2浇注系统的设计 16 4.6推出系统