水布垭面板堆石坝的三维弹塑性数值分析的研究.pdfVIP

第25 卷增刊 岩 土 力 学 Vol.25 Supp.2 2004 年11 月 Rock and Soil Mechanics Nov. 2004 文章编号 1000 7598 (2004)增 0507 07 水布垭面板堆石坝的三维弹塑性数值分析研究 汪明元 程展林 林绍忠 陈 琴 长江科学院 湖北 武汉 430010 摘 要 在建的清江水布垭面板堆石坝高达233 m 是目前同类坝型中最高的 采用MSC.Marc 非线性有限元程序 发展了 三维子模型法 对该坝进行了三维弹塑性有限元仿真分析 模拟了面板的分缝 坝体材料分区 填筑及蓄水过程 采用双屈 服面弹塑性模型模拟堆石体的变形特征 根据数值分析的结果 对坝体和面板的应力变形分布规律进行了探讨 关 键 词 混凝土面板堆石坝 非连续变形分析 双屈服面弹塑性模型 水布垭工程 + 中图分类号 TB 115 TV 641.4 3 文献标识码 A Research on 3D elastoplastic numerical analysis of stress and deformation of a concrete faced rockfill dam for Shuibuya Project 1 2 2 2 WANG Ming-yuan , CHENG Zhan-lin , LIN Shao-zhong , CHEN Qin (Yangtze River Scientific Research Institute, Wuhan 430010, China) Abstract : China’s Shuibuya Concrete Faced Rockfill Dam (CFRD) is 233 m high, it is a highest CFRD in the world at present. Now it is simulated by 3D elastoplastic FEM. The distribution of stress and deformation of the dam and the face slab in each construction step are focused. The joint of face slab in three directions, complicated material zoning, construction and storage processes were simulated. A kind of elastoplastic model of double yield surfaces model is used for the rockfill. MSC.Marc nonlinear finite element program is redeveloped and a 3D submodel method is adopted. The results show that computational accuracy of stress and deformation in high CFRD is improved. Based on the numerical analysis, the stress and deformation in Shuibuya CFRD are presented and discussed. Key words: concrete faced rockfill dam; discontinuous deformation analysis; elastoplastic model of double yield s