项目名称：石墨相氮化碳光催化体系的构建及其反应机理.doc

项目名称：石墨相氮化碳光催化体系的构建及其反应机理 推荐奖种：自然科学类 主要完成单位：福州大学 主要完成人：王心晨、付贤智、侯乙东、张金水、林A metal-free polymeric photocatalyst for hydrogen production from water under visible light《Nat. Mater.》2、Metal-Containing Carbon Nitride Compounds: A New Functional Organic-Metal Hybrid Material《Adv. Mater》3、Synthesis of a Carbon Nitride Structure for Visible-Light Catalysis by Copolymerization《Angew. Chem. Int. Ed.》4、Bioinspired hollow semiconductor nanospheres as photosynthetic nanoparticles《Nat. Commun.》5、Semiconductors for Hydrogen Photosynthesis《Angew. Chem. Int. Ed..》6、A Facile Band Alignment of Polymeric Carbon Nitride Semiconductors to Construct Isotype Heterojunctions《Angew. Chem. Int. Ed.》7、Layered Nanojunctions for Hydrogen-Evolution Catalysis《Angew. Chem. Int. Ed.》8、Fe-g-C3N4-catalyzed Oxidation of Benzene to Phenol Using Hydrogen Peroxide and Visible Light《J. Am. Chem. Soc.》 项目简介： 本项目在国家重点基础研究发展计划（973计划）、国家自然科学基金等项目的持续支持下，围绕聚合物半导体新型可见光光催化剂的设计国际著名刊物上发表SCI收录论文篇，其中包括Nat. Mater.Nat. Commun.、Angew. Chem. Int. Ed.32个国家的285个研究机构的科学家广泛引用，并被Chem. Rev.、Chem. Soc. Rev.、Adv. Mater.等英文综述和《Chemical Engineering News》、《Nature China》、《MRS Bulletin》、《MaterialsViews China》等杂志和网站大篇幅引用和评述。 项目名称：面向复杂形面物体的自动三维重建视觉系统研究与开发 推荐奖种：自然科学类 主要完成单位：福州大学、香港城市大学 主要完成人：何炳蔚、李友福 代表性论文目录：1、Camera calibration from vanishing points in a vision system《Optics Laser Technology》2、Camera calibration with lens distortion and from vanishing points《Optical Engineering》3、A View Planning Method Incorporating Self-Termination for Automated Surface Measurement《Measurement Science and Technology》4、Automatic view planning with self-termination in 3D object reconstructions《sensors and actuators a-physical》5、The research of an automatic object reconstruction method based on limit visible region of the laser-scanning vision system《ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING》6、A new camera calibration method from vanishing points in a vision system《Transactions of the Institute of Measurement and Control》7、An automatic registration a